首页> 外文期刊>IEEE Transactions on Power Electronics >Seamless Mode-Switch Control Scheme for Primary Side Regulation Flyback With Capacitorless Self-Adaptive Startup
【24h】

Seamless Mode-Switch Control Scheme for Primary Side Regulation Flyback With Capacitorless Self-Adaptive Startup

机译:用于电容式自适应启动的初级侧监管反激的无缝模式开关控制方案

获取原文
获取原文并翻译 | 示例
       

摘要

A seamless mode-switch control scheme for primary side regulation flyback with capacitorless self-adaptive startup is presented in this article to increase the system stability for full-load range and reduce the area cost. Instead of traditional soft-startup, a peak current of primary side (PCPS) control scheme without off-chip capacitor is adapted during the startup process and a homologous startup modeling is built. Including the traditional pulsewidth modulation (PWM), the pulse frequency modulation (PFM), and deep pulsewidth modulation (DPWM) are adapted to reduce the standby power at utralight load. Meanwhile, a seamless control scheme is proposed to assure the continuity among the PCPS, PWM, PFM, and DPWM mode switch. The controller chip is fabricated in 0.18 mu m BCD process. The experiment results show that the startup time and overshoot voltage are, respectively, 35 ms and 4 V at 0.8 A load current, 48 ms, and 0.2 V at 0.008 A load current. The accuracy of output voltage is within +/- 0.98% under different input voltages and loads while the peak power efficiency of 88.52% is achieved.
机译:用于与无电容器自适应启动初级侧调节回扫无缝模式切换控制方案被呈现在这篇文章中,以增加用于全负载范围内的系统的稳定性和减少面积成本。代替传统的软启动的,初级侧(PCPS)控制方案的峰值电流而不会在芯片外电容器在启动过程中适于与同源启动建模建立。包括传统的脉冲宽度调制(PWM),脉冲频率调制(PFM),并且深脉冲宽度调制(DPWM)适于降低待机功率utralight负载。同时,无缝控制方案,提出了以保证PCPS,PWM,PFM,及DPWM模式开关中的连续性。控制器芯片在0.18微米制造中号BCD工艺。实验结果表明,该启动时间和过冲电压分别是,35毫秒,在0.8 A的负载电流4 V,48毫秒,并且在0.008 A的负载电流为0.2V。输出电压的精确度在+/- 0.98%下不同的输入电压和负载,同时的88.52%的峰值功率效率得以实现。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号