首页> 外文期刊>IEEE Transactions on Magnetics >High signal-to-noise ratio of a Cr-rich CoCrPt perpendicular medium with a large medium thickness
【24h】

High signal-to-noise ratio of a Cr-rich CoCrPt perpendicular medium with a large medium thickness

机译:中等厚度的富铬CoCrPt垂直介质的信噪比高

获取原文
获取原文并翻译 | 示例
           

摘要

A Cr-rich (Co/sub 72/Cr/sub 28/)/sub 94/Pt/sub 6/ perpendicular medium with a large thickness of 300 nm, integrated with an MR head designed for longitudinal recording, achieved a high signal-to-noise ratio of 37 dB at 100 kFCI and a D/sub 50/ of 150 kFCI. A high Pt content of 17-22 at.% is effective for increasing the Hk value and signal amplitude at 10 kFCI, and for decreasing the write demagnetization. However, it also decreases the S/N at 100 kFCI and the D/sub 50/. The signal amplitude rapidly increases with the Pt content from 0 to 6 at.%, and saturates at around 6 at.%. This contributes to the high S/N obtained at a Pt content of 6-11 at.%. Compared with a longitudinal medium optimized for the same MR head, the proposed medium has a 2 dB higher S/N at 100 kFCI, a 1.3 times larger D/sub 50/, and a 1.5 times larger signal amplitude at 10 kFCI. The thickness of the medium will contribute to the thermal stability of magnetic bits at future high recording density of 10 Gbits/in/sup 2/ and beyond.
机译:具有300 nm大厚度的富铬(Co / sub 72 / Cr / sub 28 /)/ sub 94 / Pt / sub 6 /垂直介质与用于纵向记录的MR磁头集成在一起,可实现高信号- 100 kFCI时的噪声比为37 dB,D / sub 50 /为150 kFCI。 17-22 at。%的高Pt含量可有效提高Hk值和10 kFCI的信号幅度,并降低写入退磁。但是,它也会降低100 kFCI时的S / N和D / sub 50 /。信号幅度随Pt含量从0到6 at。%迅速增加,并在6 at。%左右饱和。这有助于在6-11 at。%的Pt含量下获得高S / N。与针对同一MR磁头优化的纵向介质相比,拟议的介质在100 kFCI时的S / N高2 dB,D / sub 50 /的1.3倍大,在10 kFCI时的信号振幅大1.5倍。在将来的10 Gbits / in / sup 2 /或更高的高记录密度下,介质的厚度将有助于磁性钻头的热稳定性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号