Wave Height Field Extraction From First-Order Doppler Spectra of a Dual-Frequency Wide-Beam High-Frequency Surface Wave Radar

摘要

Ocean wave height measurement using a wide-beam high-frequency surface wave radar (HFSWR) remains challenging due to its poor spatial resolution, which significantly limits the application of such compact systems. In this article, a novel method for wave height field extraction from the first-order Doppler spectra of a dual-frequency wide-beam radar is proposed. A model relating significant wave height to the ratio of the first-order spectral powers associated with two radar frequencies is put forward and studied numerically. Through theoretical analysis and experimental validation, it is confirmed that the first-order Doppler peaks of two radar frequencies have arisen from an approximately same direction of arrival (DOA), and their amplitudes are also affected by a similar wave directional spreading. Hereby, an algorithm combining beamforming and direction finding is developed to determine the spatial distribution of the first-order spectral power ratio and derive the significant wave height field. Finally, experimental results are given to verify the algorithm. The radar-derived wave height field agrees well with that obtained using a numerical wave model. Furthermore, the radar-measured wave heights are compared with the data collected by two buoys at the distances of 12.7 and 73 km, respectively. The comparison shows that the corresponding root-mean-square errors are 0.3 and 0.5 m and the correlation coefficients are 0.85 and 0.88, respectively.