...
首页> 外文期刊>IEEE journal of selected topics in quantum electronics >Subharmonic synchronous mode-locking of a monolithic semiconductor laser operating at millimeter-wave frequencies
【24h】

Subharmonic synchronous mode-locking of a monolithic semiconductor laser operating at millimeter-wave frequencies

机译:在毫米波频率下运行的单片半导体激光器的次谐波同步锁模

获取原文
获取原文并翻译 | 示例

摘要

Optical pulse trains at millimeter-wave frequencies are generated by subharmonic synchronous mode-locking of a monolithic distributed Bragg reflector semiconductor laser, by which an initially passively mode-locked semiconductor laser is stabilized by injecting optical pulses at subharmonic frequencies of its resonant frequency. The stabilized pulse trains are characterized in terms of phase noise, timing jitter, locking range and modulation depth under various injection conditions including injected signal power levels, pulsewidths, and subharmonic numbers. It is also shown that subharmonic synchronous mode-locking can provide pulse trains with a very low level of phase noise (/spl les/-86 dBc/Hz @ 10 kHz offset), reasonably wide locking ranges (4-20 MHz) and low levels of amplitude modulation (96%-99%). Such pulse characteristics are compared with those achieved by the subharmonic hybrid mode-locking scheme, where stabilization is realized by injecting electrical signals at subharmonic frequencies of the laser's resonant frequency. It is shown that subharmonic hybrid mode-locking is only effective at low subharmonic numbers (2-6), while subharmonic synchronous mode-locking can be realized with much larger subharmonic numbers. It is also revealed from the comparison that while subharmonic hybrid mode-locking scheme is simple and cost-effective approach for the generation of high-frequency signals from semiconductor lasers, subharmonic synchronous mode-locking scheme can offer pulse trains using very low-frequency driving electronics with superior performance such as larger locking ranges, and lower levels of phase noise and amplitude modulation.
机译:毫米波频率的光脉冲序列是通过单块分布式布拉格反射器半导体激光器的次谐波同步锁模产生的,通过注入其谐振频率的次谐波频率的光脉冲,可以使最初的被动锁模半导体激光器稳定下来。稳定的脉冲序列的特征在于在各种注入条件下的相位噪声,定时抖动,锁定范围和调制深度,包括注入的信号功率电平,脉冲宽度和次谐波数。还表明,亚谐波同步模式锁定可以为脉冲序列提供非常低的相位噪声水平(/ spl les / -86 dBc / Hz @ 10 kHz偏移),相当宽的锁定范围(4-20 MHz)和较低的幅度调制级别(96%-99%)。将这种脉冲特性与通过次谐波混合锁模方案实现的脉冲特性进行比较,在次谐波混合锁模方案中,通过以激光谐振频率的次谐波频率注入电信号来实现稳定。结果表明,次谐波混合锁模仅在低次谐波数(2-6)时有效,而次谐波同步锁模可以在更大的次谐波数下实现。从比较中还可以看出,虽然次谐波混合锁模方案是一种简单且经济高效的方法,用于从半导体激光器生成高频信号,但次谐波同步锁模方案可以使用非常低频的驱动来提供脉冲序列具有卓越性能的电子产品,例如更大的锁定范围,更低的相位噪声和幅度调制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号