首页> 外文期刊>IEE proceedings. Part G, Circuits, devices and systems >Signed higher-radix full-adder algorithm and implementation with current-mode multi-valued logic circuits
【24h】

Signed higher-radix full-adder algorithm and implementation with current-mode multi-valued logic circuits

机译:带符号的高基数全加器算法以及采用电流模式多值逻辑电路的实现

获取原文
获取原文并翻译 | 示例
           

摘要

A novel algorithm for full-addition of two signed, higher-radix numbers is proposed and implemented by combining multi-valued logic min, max, literal and cyclic operators. Owing to disjoint terms involved, multi-valued logic min and max operators are replaced with ordinary transmission operation and sum, respectively. A multi-valued logic cyclic gate is designed by using a current-mode threshold circuit while the literal is realised by only voltage-mode switching circuits. The threshold circuit employed within the cyclic gate exhibits improved dynamic behaviour compared to its previous counterparts employing voltage-mode binary logic switching circuits. It also allows much higher radices compared to previous current-mode threshold circuits owing to its superior mismatch properties. Thus, the cyclic gate achieves a superior performance compared to its predecessors. As a direct extension to cyclic operation in radix-8, a resultant single-digit, radix-8 full-adder and its 3-bit counterpart voltage-mode circuits are designed and their performance compared. It is shown that the developed signed addition algorithm can be realised by using the proposed full-adder. Finally, the algorithm is also exploited for a multi-digit case. Simulation results demonstrate that proposed architectures can be used in high-performance arithmetic units
机译:通过结合多值逻辑最小,最大,立即数和循环运算符,提出并实现了一种新颖的算法,用于对两个有符号的高基数进行全加。由于涉及到不相交的项,多值逻辑最小值和最大值运算符分别被普通的传输运算和和所取代。通过使用电流模式阈值电路设计多值逻辑循环门,而仅通过电压模式开关电路实现文字。与之前采用电压模式二进制逻辑开关电路的同类产品相比,循环门中使用的阈值电路表现出改善的动态性能。由于其卓越的失配特性,与以前的电流模式阈值电路相比,它还允许更高的半径。因此,与以前的相比,循环门具有更高的性能。作为对radix-8循环操作的直接扩展,设计了所得的一位基数radix-8全加法器及其3位对应电压模式电路,并比较了它们的性能。结果表明,提出的全加器可以实现所开发的带符号加法算法。最后,该算法还被用于多位数情况。仿真结果表明,所提出的体系结构可用于高性能算术单元

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号