Originally announced at the CES 2008, the smooth teardrop shape of Crystal Cable's Arabesque floorstander has been abandoned in favour of the faceted glass enclosure illustrated above. Composed of 1.9cm-thick sheets of transparent glass, each facet is held in place with a UV-cured glue that's invisible even under close inspection. The Arabesque is a two-way design, reflex-loaded through a vertical slot at the rear of the tapered glass enclosure and offering a claimed 27Hz/-3dB bass extension. The Audio Technology bass/mid drivers and RAAL ribbon tweeter are re-worked to Crystal's specification, crossing over at 1.6kHz and presenting a 4ohm nominal impedance with a 450W power handling. Edwin van der Kley, of Siltech Pantheon fame [see HFN, Feb '08] is responsible for much of the technology behind this 80kg speaker that also claims a low <0.5% distortion at 1kHz with a sensitivity of 93dB.
展开▼
机译：最初是在CES 2008上宣布的，Crystal Cable的蔓藤花纹落地式投影机的光滑泪珠形状已被放弃，取而代之的是上面说明的多面玻璃外壳。由1.9厘米厚的透明玻璃片组成，每个刻面都用UV固化胶固定在适当位置，即使在仔细检查下也看不见。蔓藤花纹是一种双向设计，通过锥形玻璃外壳后部的垂直插槽进行反射加载，并提供声称的27Hz / -3dB低音扩展。音频技术的低音/中置驱动器和RAAL带状高音扬声器经过重新设计，达到了Crystal的规格，频率超过1.6kHz，并具有450W功率处理时的4ohm标称阻抗。 Siltech Pantheon声望的Edwin van der Kley [参见HFN，08年2月]负责了这款80kg扬声器背后的大部分技术，该扬声器还声称在1kHz时失真率低<0.5％，灵敏度为93dB。
展开▼
