...
首页> 外文期刊>Fusion Science and Technology >DIFFUSION AND PERMEATION OF DEUTERIUM IN EUROFER97: EFFECT OF IRRADIATION AND OF IMPLANTED HELIUM
【24h】

DIFFUSION AND PERMEATION OF DEUTERIUM IN EUROFER97: EFFECT OF IRRADIATION AND OF IMPLANTED HELIUM

机译:氘在Eurofer97中的扩散和渗透:辐照和植入氦气的影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Permeability, diffusivity, and solubility of deuterium in the low-activation martensitic stainless steel EURO-FER97 were derived from measurements of gas permeation in the transient and steady-state regimes at temperatures from 100 to 350℃ and at pressures from 2 x 10~3 to 2 x 10~5 Pa. The specimens were used in four conditions to investigate the effect of irradiation-induced defects: standard annealed condition, preirradiated with protons, implanted with helium, and implanted plus annealed to produce helium bubbles. In general, displacement defects as well as implanted helium tend to decrease permeation and diffusivity. Permeation and diffusion measurements were also performed under simultaneous irradiation, showing no net effect if the slight temperature increase due to irradiation is taken into account. Diffusion measurement of implanted hydrogen gave equal or slightly lower values than gas permeation, which is in qualitative agreement with results from preirradiated specimens. Trapping parameters are derived by a detailed comparison to a saturable-trap model. Results are compared to previous studies on 7%Cr F82H and 11%Cr MANET-II steels, and effects of compositional variations are indicated.
机译:氘在低活化马氏体不锈钢EURO-FER97中的渗透性,扩散性和溶解度是根据在100至350℃的温度和2 x 10〜3的压力下瞬态和稳态下气体渗透的测量结果得出的到2 x 10〜5 Pa。在四个条件下使用样品研究辐照引起的缺陷的影响:标准退火条件,质子预辐照,注入氦气以及注入+退火后产生氦气气泡。通常,位移缺陷以及注入的氦气往往会降低渗透性和扩散性。在同时照射下也进行渗透和扩散测量,如果考虑到由于照射引起的轻微温度升高,则没有净效应。注入氢的扩散测量得出的值与气体渗透率相等或略低,这与预辐照样品的结果在质量上是一致的。陷阱参数是通过与可饱和陷阱模型进行详细比较而得出的。将结果与先前对7%Cr F82H和11%Cr MANET-II钢的研究进行比较,并指出了成分变化的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号