首页> 外文期刊>Fusion Science and Technology >LITHIUM-GETTERED MOVING SURFACE PLASMA-FACING COMPONENTS FOR PARTICLE CONTROL IN STEADY STATE MAGNETIC FUSION DEVICES
【24h】

LITHIUM-GETTERED MOVING SURFACE PLASMA-FACING COMPONENTS FOR PARTICLE CONTROL IN STEADY STATE MAGNETIC FUSION DEVICES

机译:稳态磁熔装置中用于粒子控制的吸杂锂的移动表面等离子组件

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In our previous work, the first proof-of-principle experiments were successfully conducted on the particle control capability based on the concept of moving-surface plasma-facing component (MS-PFC). Over a continuously titanium-gettered rotating drum, hydrogen recycling was found to be reduced down to levels around 94% even at steady state. These experiments on the MS-PFC concept have now been extended to the second stage where lithium is employed as the getter material, while using the same rotating drum. These experiments are intended to pilot the potential use of lithium as a flowing liquid facing the edge plasmas in steady state reactors beyond ITER. Reported in this paper are rather dramatic findings that hydrogen recycling is reduced down to levels around 76% and 86% at steady state over the rotating drum at the lithium deposition rates of 9.5 A/s and 7.3 A/s, respectively. These steady state recycling data have been nicely reproduced by a simple zero-dimensional particle balance model.
机译:在我们之前的工作中,基于移动表面等离子体组件(MS-PFC)的概念,成功地进行了粒子控制能力的首次原理验证实验。在连续吸钛的转鼓上,发现即使在稳态下,氢的再循环也可降低至94%左右。这些有关MS-PFC概念的实验现已扩展到第二阶段,在该阶段中,使用锂作为吸气材料,同时使用相同的转鼓。这些实验旨在试探在ITER以外的稳态反应器中,将锂作为流动液体面对边缘等离子体的潜在用途。本文报道的是相当引人注目的发现,在转鼓中,在9.5 A / s和7.3 A / s的锂沉积速率下,在稳定状态下氢气的循环利用率分别降至76%和86%左右。这些稳态回收数据已通过简单的零维粒子平衡模型很好地重现了。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号