...
首页> 外文期刊>Fuel >Tin and tin-titanium as catalyst components for reversible hydrogen storage of sodium aluminium hydride
【24h】

Tin and tin-titanium as catalyst components for reversible hydrogen storage of sodium aluminium hydride

机译:锡和锡钛作为氢化铝钠可逆储氢的催化剂组分

获取原文
获取原文并翻译 | 示例

摘要

This paper is concerned with the effects of adding tin and/or titanium dopant to sodium aluminium hydride for both dehydrogenation and re-hydrogenation reactions during their reversible storage of molecular hydrogen. Temperature programmed decomposition (TPD) measurements show that the dehydrogenation kinetics of NaAlH_4 are significantly enhanced upon doping the material with 2 mol percent of tributyltin hydride, Sn(Bu)_3H but the tin catalyst dopant is shown to be inferior than titanium. On the other hand, in this preliminary work, a significant synergetic catalytic effect is clearly revealed in material co-doped with both titanium and tin catalysts which shows the highest reversible rates of dehydrogenation and re-hydrogenation (after their hydrogen depletion). The re-hydrogenation rates of depleted Sn/Ti/NaAlH_4 evaluated at both 9.5 and 140 bars hydrogen are also found to be favourable compared to the Ti/NaAlH_4, which clearly suggest the importance of the catalyst choice. Basing on these results some mechanistic insights for the catalytic reversible dehydrogenation and re-hydrogenation processes of Sn/Ti/NaAlH_4 are therefore made.
机译:本文关注的是在氢化钠铝中添加锡和/或钛掺杂剂对分子氢的可逆存储过程中的脱氢和再氢化反应的影响。程序升温分解(TPD)测量表明,在向材料中添加2 mol%的三丁基氢化锡Sn(Bu)_3H时,NaAlH_4的脱氢动力学得到了显着增强,但是锡催化剂的掺杂剂却比钛低。另一方面,在该初步工作中,在钛和锡催化剂共掺杂的材料中清楚地显示出显着的协同催化作用,该材料显示出最高的可逆脱氢和再氢化速率(在氢耗尽之后)。与Ti / NaAlH_4相比,在9.5巴和140巴氢气下评估的贫化Sn / Ti / NaAlH_4的再氢化速率也被发现是有利的,这清楚地表明了选择催化剂的重要性。基于这些结果,因此对Sn / Ti / NaAlH_4的催化可逆脱氢和再加氢过程提供了一些机械方面的见解。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号