A black-oil approach to model produced gas injection in both conventional and tight oil-rich reservoirs to enhance oil recovery

摘要

A robust compositionally extended black-oil simulation approach is developed, which is capable of including the effect of large gas-oil capillary pressure for first contact miscible (FCM), and immiscible gas injection. The simulation methodology is applied to gas flooding in both high and very low permeability reservoirs. For a high permeability conventional reservoir, simulations use a five-spot pattern with different reservoir pressures to mimic both FCM and immiscible displacements. The results show that the simple modified black-oil approach can model well both immiscible and miscible floods, as long as the minimum miscibility pressure (MMP) is matched. For a tight oil-rich reservoir, primary depletion and huff-n-puff gas injection are simulated including the effect of large gas-oil capillary pressure in flow and in flash calculation on recovery. Finally, a dynamic gas-oil relative permeability correlation that accounts for the compositional changes owing to the produced gas injection is introduced and applied to correct for changes in interfacial tension (IFT), and its effect on oil recovery is examined. The results show that the new black-oil approach can model these processes well and could be implemented when fully compositional simulations are computationally too time consuming. For the first time, a black-oil type reservoir simulation method is used to simulate near-miscible and immiscible produced gas injection enhanced oil recovery. It provides a fast and robust alternative for large-scale reservoir simulation with the purpose of flaring/venting reduction through reinjecting the produced gas into the reservoir for EOR.