首页> 外文期刊>Fire Safety Journal >Temperature elevation and trajectory in the downwind region of rectangular fire sources in cross-winds
【24h】

Temperature elevation and trajectory in the downwind region of rectangular fire sources in cross-winds

机译:跨风中矩形火源下行区域的温度升降和轨迹

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The effect of cross-wind on the temperature elevation in the downwind region of rectangular diffusion burners was investigated in wind tunnel experiments. The experimental parameters were the geometry of the diffusion burner (the side length parallel and orthogonal to the cross-wind L-1 = 0.2-0.8 m and L-2 = 0.4-2.0 m, respectively, and the aspect ratio r = 1-10), the heat release rate ((Q)over dot = 38.3-383.3 kW), and the inflow velocity of the cross-wind (U-infinity = 0.59-1.49 m/s). Following the concept of the previously proposed point fire source model, the fractional contribution of the cross-wind velocity on the velocity along the trajectory N was introduced to close the system of governing equations, and a relevant line fire source model was derived. The line fire source model was correlated by the measurement results of the present experiment for the diffusion burner with the largest aspect ratio (r = 10). Although the predicted temperature elevation along the trajectory by the present model was similar to that of the existing models, there was a substantial discrepancy in the predicted trajectory. For the unified analysis of temperature elevation and trajectories of the fire sources with various aspect ratios, the point fire source model was firstly tested to correlate the measurement results. As expected, the agreement was less successful for the results of the fire sources with large aspect ratios, especially in the region close to the fire source. Thus, the point fire source model was modified to consider the physical effects of the aspect ratio of the fire source and the attachment of the fire plume to the ground by invoking the correlations for the line fire source. With the modified model, the agreement between the predicted and measured results significantly improved. The proposed model is useful for assessing the hazards of wind-blown fire plumes in large outdoor fires on human activities such as firefighting or the evacuation of residents.
机译:在风隧道实验中研究了横向对矩形扩散燃烧器的下行区域温度升高的影响。实验参数分别是扩散燃烧器的几何形状(侧长平行并与交叉风L-1垂直,分别与横向横向= 0.2-0.8m,L-2 = 0.4-2.0m,纵横比r = 1- 10),热释放速率((q)越= 38.3-383.3 kW),交叉风的流入速度(U-Infinity = 0.59-1.49 m / s)。在先前提出的点消火源模型的概念之后,引入了沿着轨迹N沿轨迹N的速度对速度的分数贡献,以关闭控制方程的系统,并导出相关线火源模型。线消防源模型通过具有最大纵横比(R = 10)的扩散燃烧器的目前实验的测量结果相关。尽管本模型的轨迹的预测温度高度类似于现有模型的轨迹,但是预测的轨迹中存在大幅差异。对于具有各种纵横比的升温升高和消防源轨迹的统一分析,首先测试了点消防源模型以与测量结果相关联。正如预期的那样,该协议对具有大宽高比的消防来源的结果不太成功,特别是在靠近火源的地区。因此,通过调用线火源的相关性来修改点消火源模型以考虑消防源的纵横比的物理效果和火羽流与地面的附接。通过修改模型,预测和测量结果之间的协议显着提高。该拟议的模型对于评估大型户外火灾中的风吹火羽毛的危害是有用的,例如消防或居民的疏散。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号