首页> 外文期刊>European Spine Journal >In vitro study of accuracy of cervical pedicle screw insertion using an electronic conductivity device (ATPS part III)
【24h】

In vitro study of accuracy of cervical pedicle screw insertion using an electronic conductivity device (ATPS part III)

机译:使用电子电导率仪进行颈椎椎弓根螺钉插入准确性的体外研究(ATPS第III部分)

获取原文
获取原文并翻译 | 示例
           

摘要

Reconstruction of the highly unstable, anteriorly decompressed cervical spine poses biomechanical challenges to current stabilization strategies, including circumferential instrumented fusion, to prevent failure. To avoid secondary posterior surgery, particularly in the elderly population, while increasing primary construct rigidity of anterior-only reconstructions, the authors introduced the concept of anterior transpedicular screw (ATPS) fixation and plating. We demonstrated its morphological feasibility, its superior biomechanical pull-out characteristics compared with vertebral body screws and the accuracy of inserting ATPS using a manual fluoroscopically assisted technique. Although accuracy was high, showing non-critical breaches in the axial and sagittal plane in 78 and 96%, further research was indicated refining technique and increasing accuracy. In light of first clinical case series, the authors analyzed the impact of using an electronic conductivity device (ECD, PediGuard) on the accuracy of ATPS insertion. As there exist only experiences in thoracolumbar surgery the versatility of the ECD was also assessed for posterior cervical pedicle screw fixation (pCPS). 30 ATPS and 30 pCPS were inserted alternately into the C3–T1 vertebra of five fresh-frozen specimen. Fluoroscopic assistance was only used for the entry point selection, pedicle tract preparation was done using the ECD. Preoperative CT scans were assessed for sclerosis at the pedicle entrance or core, and vertebrae with dense pedicles were excluded. Pre- and postoperative reconstructed CT scans were analyzed for pedicle screw positions according to a previously established grading system. Statistical analysis revealed an astonishingly high accuracy for the ATPS group with no critical screw position (0%) in axial or sagittal plane. In the pCPS group, 88.9% of screws inserted showed non-critical screw position, while 11.1% showed critical pedicle perforations. The usage of an ECD for posterior and anterior pedicle screw tract preparation with the exclusion of dense cortical pedicles was shown to be a successful and clinically sound concept with high-accuracy rates for ATPS and pCPS. In concert with fluoroscopic guidance and pedicle axis views, application of an ECD and exclusion of dense cortical pedicles might increase comfort and safety with the clinical use of pCPS. In addition, we presented a reasonable laboratory setting for the clinical introduction of an ATPS-plate system.
机译:高度不稳定,前路减压的颈椎的重建对当前的稳定策略(包括环向器械融合)的生物力学提出了挑战,以防止其失败。为了避免二次后路手术(尤其是在老年人中),同时增加仅前路重建物的主要结构刚度,作者介绍了前路椎弓根螺钉(ATPS)固定和钢板的概念。我们证明了它的形态学可行性,与椎体螺钉相比优越的生物力学拔出特性以及使用手动荧光镜辅助技术插入ATPS的准确性。尽管精度很高,在轴向和矢状面上显示出非关键性断裂,分别占78%和96%,但仍需要进一步研究,以提炼技术并提高精度。根据第一个临床病例系列,作者分析了使用电导率设备(ECD,PediGuard)对ATPS插入准确性的影响。由于仅存在胸腰椎手术的经验,因此还对后颈椎弓根螺钉固定(pCPS)评估了ECD的多功能性。将30 ATPS和30 pCPS交替插入五个新鲜冷冻标本的C3–T1椎骨中。荧光镜检查仅用于选择切入点,使用ECD进行椎弓根的准备。评估术前CT扫描在椎弓根入口或椎弓根的硬化情况,排除椎弓根密集的椎骨。根据先前建立的分级系统,分析术前和术后重建的CT扫描的椎弓根螺钉位置。统计分析显示,ATPS组的准确性非常高,在轴向或矢状平面内没有关键的螺钉位置(0%)。在pCPS组中,插入的螺钉的88.9%显示非关键性螺钉位置,而11.1%的螺钉显示出关键性椎弓根穿孔。 ECD用于椎弓根后路和前路椎弓根预备术的使用,已被证明是一种成功且临床上合理的概念,具有ATPS和pCPS的高准确率。与透视引导和椎弓根轴视图配合使用,ECD的应用和排除密实皮质椎弓根可能会增加pCPS在临床上的舒适性和安全性。此外,我们为ATPS板系统的临床介绍提出了合理的实验室设置。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号