Biological treatment of produced water in a sequencing batch reactor by a consortium of isolated halophilic microorganisms

摘要

Produced water or oilfield wastewater is the largest volume of a waste stream associated with oil and gas production. The aim of this study was to investigate the biological pretreatment of synthetic and real produced water in a sequencing batch reactor (SBR) to remove hydrocarbon compounds. The SBR was inoculated with isolated tropical halophilic microorganisms capable of degrading crude oil. A total sequence of 24 h (60 min filling phase; 21 h aeration; 60 min settling and 60 min decant phase) was employed and studied. Synthetic produced water was treated with various organic loading rates (OLR) (0.9 kg COD m~(-3) d~(-1), 1.8 kg COD m~(-3) d~(-1) and 3.6 kg COD m~(-3) d~(-1)) and different total dissolved solids (TDS) concentration (35,000 mg L~(-1), 100,000 mg L~(-1), 150,000 me L~(-1), 200,000 mg L~(-1) and 250,000 mg L~(-1)). It was found that with an OLR of 0.9 kg COD m~(-3) d~(-1) and 1.8 kg COD m~(-3)d~(-1), average oil and grease (O&G) concentrations in the effluent were 7 mg L~(-1) and 12 mg L~(-1), respectively. At TDS concentration of 35,000 mg L~(-1) and at an OLR of 1.8 kg COD m~(-3)d~(-1), COD and O&G removal efficiencies were more than 90%. However, with increase in salt content to 250,000 mg L~(-1), COD and O&G removal efficiencies decreased to 74% and 63%, respectively. The results of biological treatment of real produced water showed that the removal rates of the main pollutants of wastewater, such as COD, TOC and O&G, were above 81%, 83 %, and 85%, respectively.