首页> 外文期刊>Environmental Technology >Biodegradation of poly ether-poly ol-based polyurethane elastomeric films: influence of partial replacement of polyether polyol by biopolymers of renewable origin
【24h】

Biodegradation of poly ether-poly ol-based polyurethane elastomeric films: influence of partial replacement of polyether polyol by biopolymers of renewable origin

机译:聚醚-多元醇基聚氨酯弹性体膜的生物降解:可再生来源的生物聚合物部分取代聚醚多元醇的影响

获取原文
获取原文并翻译 | 示例
       

摘要

In this work we investigated the degradation process of polyether-polyol-based polyurethane (PUR) elastomeric films in the presence of a mixed thermophilic culture as a model of a natural bacterial consortium. The presence of PUR material in cultivation medium resulted in delayed but intensive growth of the bacterial culture. The unusually long lag phase was caused by the release of unreacted polyether polyol and tin catalyst from the material. The lag phase was significantly shortened and the biodegradability of PUR materials was enhanced by partial replacement (10%) of polyether polyol with biopolymers (carboxymethyl cellulose, hydroxyethyl cellulose, acetyl cellulose and actylated starch). The process of material degradation consisted of two steps. First, the materials were mechanically disrupted and, second, the bacterial culture was able to utilize abiotic degradation products, which resulted in supported bacterial growth. Direct utilization of PUR by the bacterial culture was observed as well, but the bacterial culture contributed only slightly to the total mass losses. The only exception was PUR material modified by acetyl cellulose. In this case, direct biodegradation represented the major mechanism of material decomposition. Moreover, PUR material modified by acetyl cellulose did not tend to undergo abiotic degradation. In conclusion, the modification of PUR by proper biopolymers is a promising strategy for reducing potential negative effects of waste PUR materials on the environment and enhancing their biodegradability.
机译:在这项工作中,我们研究了在混合嗜热培养作为天然细菌财团模型的情况下,聚醚多元醇基聚氨酯(PUR)弹性体膜的降解过程。培养基中PUR物质的存在导致细菌培养物延迟但密集的生长。异常长的滞后阶段是由材料中未反应的聚醚多元醇和锡催化剂的释放引起的。通过用生物聚合物(羧甲基纤维素,羟乙基纤维素,乙酰纤维素和活化淀粉)部分取代(10%)聚醚多元醇,可显着缩短滞后阶段,提高PUR材料的生物降解性。材料降解的过程包括两个步骤。首先,材料受到了机械破坏,其次,细菌培养能够利用非生物降解产物,从而导致了细菌的生长。还观察到细菌培养物直接利用了PUR,但是细菌培养物仅对总质量损失有轻微贡献。唯一的例外是用乙酰纤维素改性的PUR材料。在这种情况下,直接生物降解是物质分解的主要机理。而且,被乙酰纤维素改性的PUR材料不倾向于非生物降解。总之,通过适当的生物聚合物对PUR进行改性是减少废PUR材料对环境的潜在负面影响并增强其生物降解性的有前途的策略。

著录项

  • 来源
    《Environmental Technology》 |2011年第10期|p.1043-1052|共10页
  • 作者单位

    Department of Food Chemistry and Biotechnology, Brno University of Technology, Brno, Czech Republic;

    Department of Food Chemistry and Biotechnology, Brno University of Technology, Brno, Czech Republic;

    Department of Material Chemistry, Brno University of Technology, Brno, Czech Republic;

  • 收录信息 美国《科学引文索引》(SCI);美国《生物学医学文摘》(MEDLINE);美国《化学文摘》(CA);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    polyether polyurethanes; elastomeric films; biodegradation;

    机译:聚醚聚氨酯;弹性膜生物降解;
  • 入库时间 2022-08-17 13:31:48

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号