首页> 外文期刊>Environmental Engineering Science >Tillage and Irrigation Impacts on the Efficiency of Fossil Fuel Utilization for Hungarian Vetch Production and Fuel-Related CO_2 Emissions
【24h】

Tillage and Irrigation Impacts on the Efficiency of Fossil Fuel Utilization for Hungarian Vetch Production and Fuel-Related CO_2 Emissions

机译:耕作和灌溉对匈牙利紫etch生产和与燃料有关的CO_2排放的化石燃料利用效率的影响

获取原文
获取原文并翻译 | 示例
       

摘要

Improving energy efficiency in tillage is critical for developing sustainable agriculture and mitigating fuel-related CO2 emissions. However, data on energy efficiency and CO2 emissions across various tillage-sowing practices remain scarce in terms of vetch production. The study aimed at evaluating the impact of four tillage-sowing practices (conventional tillage [CT], Reduced-I and II, and no-tillage [NT]) on the fuel consumption, energy productivity, and fuel-related CO2 releases in Hungarian vetch production. The study was performed in Turkey, in semiarid conditions using two water applications (rainfed and irrigated) under two different crop rotations (rainfed: vetch-wheat-fallow and irrigated: vetch-wheat-sunflower). The study findings revealed that while CT had the highest diesel-fuel consumptions (52.2 L/ha in irrigated and 53.1 L/ha in rainfed), the lowest values were determined in NT (16.4 L/ha in irrigated and 16.6 L/ha in rainfed). Total energy requirements were the highest in CT, and determined 11827.4 MJ/ha (5229.1 MJ/ha direct and 10502.5 MJ/ha nonrenewable) in irrigated rotation and 9328.5 MJ/ha (3013.6 MJ/ha direct and 8004.6 MJ/ha nonrenewable) in rainfed conditions. Moreover, CT provided the lowest energy ratio (4.41 in irrigated and 3.87 in rainfed). NT practice required significantly lower total (20.6% in irrigated and 27.8% in rainfed), direct (52.5% in irrigated and 68.8% in rainfed), and nonrenewable energies (23.1% in irrigated and 32.3% in rainfed) and provided higher energy ratio (24.0% in irrigated and 53.2% in rainfed) compared to CT. Irrigation increased energy gain by 48.2% on average. Conservation tillage logarithmically reduced CO2 emissions in both rotations. NT and reduced tillage practices generated 68.7% and 42.2% lower emissions on average compared to CT (151.1 kg CO2/ha), respectively. It was concluded that NT can be a suitable practice to achieve higher energy efficiency and lower CO2 emissions in vetch production. However, reduced tillage can be favorable due to the limited application of NT in most countries.
机译:提高耕作的能源效率对于发展可持续农业和减少与燃料有关的二氧化碳排放至关重要。但是,就v子产量而言,关于各种耕作方式的能效和二氧化碳排放量的数据仍然很少。该研究旨在评估四种耕作方式(常规耕作[CT],I-Red和II减少耕作和免耕[NT])对匈牙利人的燃料消耗,能源生产率和与燃料有关的CO2释放的影响提取生产。这项研究是在半干旱条件下的土耳其进行的,在两种不同的作物轮作下(两次灌溉::子小麦小叶和灌溉:v子小麦日葵花),两次浇水(雨水灌溉)。研究结果表明,尽管CT的柴油消耗量最高(灌溉时为52.2 L / ha,雨养时为53.1 L / ha),但北卡罗来纳州却确定了最低值(灌溉时为16.4 L / ha,而灌溉时为16.6 L / ha)。喂)。在CT中,总能量需求最高,在灌溉轮作中确定为11827.4 MJ / ha(直接的5229.1 MJ / ha和10502.5 MJ / ha的不可再生),在灌溉水轮中确定为9328.5 MJ / ha(直接的3013.6 MJ / ha和8004.6 MJ / ha)。雨养条件。此外,CT的能量比最低(灌溉为4.41,雨养为3.87)。北领地实践要求总能源消耗显着降低(灌溉占20.6%,雨养占27.8%),直接能源(灌溉占52.5%,雨养占68.8%)和不可再生能源(灌溉占23.1%,雨养占32.3%),并且能量比更高(CT的灌溉比例为24.0%,雨养的比例为53.2%)。灌溉使能量获取平均增加了48.2%。保护性耕作在两次轮作中均以对数形式减少了二氧化碳的排放。与CT(151.1 kg CO2 / ha)相比,NT和减少耕种的平均排放量分别减少68.7%和42.2%。得出的结论是,NT可能是在v子生产中实现更高的能源效率和更低的CO2排放的合适实践。但是,由于在大多数国家/地区限制NT的应用,减少耕作可能是有利的。

著录项

  • 来源
    《Environmental Engineering Science》 |2020年第3期|201-213|共13页
  • 作者

  • 作者单位

    Republic of Turkey Ministry of Agriculture and Forestry East Anatolian Agricultural Research Institute;

    Department of Agricultural Structures and Irrigation and Faculty of Agriculture Ataturk University;

    Department of Agricultural Machinery and Technologies Engineering Faculty of Agriculture Ataturk University;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    CO2 emission; crop rotation; energy use efficiency; tillage systems;

    机译:二氧化碳排放量;轮作;能源利用效率;耕作系统;
  • 入库时间 2022-08-18 05:17:58

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号