...
首页> 外文期刊>Energy Exploration & Exploitation >Suitability of utilizing small horizontal axis wind turbines for off grid loads in eastern region of Saudi Arabia
【24h】

Suitability of utilizing small horizontal axis wind turbines for off grid loads in eastern region of Saudi Arabia

机译:在沙特阿拉伯东部地区使用小型水平轴风力发电机应对离网负荷的适用性

获取原文
获取原文并翻译 | 示例

摘要

Small wind turbines of 1-3, 5-10, and 15-20kW rated powers are used to find out suitable and efficient turbines for power generation in the eastern region of Saudi Arabia. Additionally, the effect of hub height on energy output and the plant capacity factor is investigated to recommend an optimal hub height to be used in the present case. To achieve the set objectives, hourly mean wind speed data measured at 20, 30, and 40m and wind direction at 30 and 40m during 13 September 2005 to 9 May 2010 have been utilized. The annual mean wind speed values were 5.73, 5.34, and 4.75m/s at 40, 30, and 20m with north-north west (NNW) prevailing wind direction. An increase of about 20.7% was estimated in wind speed measured at 40m compared to that at 20m. Wind turbines Fortis Passat1.4kW, Fortis Montana5.8kW, Fortis Alize10kW, and CF2020kW with annual energy and plant capacity factor of 7.015MWh and 57.2%, 25.955MWh and 51.08%, 42.603MWh and 48.63%, and 54.674MWh and 31.21% were the most efficient turbines for the chosen location, respectively. Highest percentage increase in annual energy yield was obtained for a mere change of 5m from 15 to 20m in hub height in the present case study. The next best annual energy yield was obtained while increasing hub height from 20 to 30m.
机译:额定功率为1-3、5-10和15-20 kW的小型风力涡轮机用于在沙特阿拉伯东部地区寻找合适的高效涡轮机进行发电。此外,研究了轮毂高度对能量输出和工厂容量因子的影响,以建议在当前情况下使用的最佳轮毂高度。为了实现既定目标,已利用了2005年9月13日至2010年5月9日在20、30和40m处测得的每小时平均风速数据以及在30和40m处测得的风向。在40、30和20m处,年平均风速值分别为5.73、5.34和4.75m / s,以北北西(NNW)为主导风向。在40m处测得的风速估计比在20m处增加约20.7%。风力涡轮机Fortis Passat1.4kW,Fortis Montana5.8kW,Fortis Alize10kW和CF2020kW,其年能源和工厂容量系数分别为7.015MWh和57.2%,25.955MWh和51.08%,42.603MWh和48.63%,54.674MWh和31.21%所选位置的最高效涡轮机。在本案例研究中,仅将轮毂高度从15m改变为20m的5m即可获得最高的年能源产量百分比增长。在将轮毂高度从20m增加到30m的同时,获得了次佳的年度能源产量。

著录项

  • 来源
    《Energy Exploration & Exploitation》 |2016年第3期|449-467|共19页
  • 作者单位

    King Fahd Univ Petr & Minerals, Res Inst, Engn Res Ctr, Dhahran 31261, Saudi Arabia;

    Univ Pretoria, Mech & Aeronaut Engn Dept, ZA-0002 Pretoria, South Africa|Jubail Ind Coll, Dept Mech & Mfg Engn Technol, Jubail Ind City, Saudi Arabia;

    Univ Pretoria, Mech & Aeronaut Engn Dept, ZA-0002 Pretoria, South Africa;

    Harbin Inst Technol, Shenzhen Grad Sch, Inst Turbulence Noise Vibrat Interact & Control, Shenzhen, Peoples R China;

    King Fahd Univ Petr & Minerals, Res Inst, Engn Res Ctr, Dhahran 31261, Saudi Arabia;

    King Saud Univ, Coll Engn, Petr & Nat Gas Engn Dept, Riyadh, 11451, Saudi Arabia|Benha Univ, Fac Sci, Dept Geol, Banha, Egypt;

    King Saud Univ, Coll Sci, Dept Geol & Geophys, Riyadh, 11451, Saudi Arabia;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Small wind turbine; hub height; wind speed; turbulence intensity; wind power density; annual energy yield;

    机译:小型风力发电机;轮毂高度;风速;湍流强度;风功率密度;年发电量;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号