...
首页> 外文期刊>Energy & environmental science >A series of metal-organic frameworks with high methane uptake and an empirical equation for predicting methane storage capacity
【24h】

A series of metal-organic frameworks with high methane uptake and an empirical equation for predicting methane storage capacity

机译:一系列甲烷吸收率高的金属有机骨架和预测甲烷储存能力的经验方程

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

A series of metal-organic frameworks (NOTT-100a (MOF-505a), NOTT-101a, NOTT-102a, NOTT-103a and NOTT-109a) with variable open copper sites and micropore spaces have been examined as potential adsorbents for methane storage. They exhibit high adsorption capacities for methane at 300 K and 35 bar (181-196 cm~3 (STP) cm~(-3)). Supposing that the deliverable amount of methane is defined as the difference in the amount of methane adsorbed between 5 bar and 35 bar, NOTT-101a, NOTT-102a and NOTT-103a exhibit excellent deliverable capacities of methane (136-140 cm~3 (STP) cm~(-3)), comparable to the highest of all previously reported MOF materials. The gravimetric methane uptake in this MOF series systematically increases with increasing porosity, while their methane storage pore occupancy decreases with increasing pore size. The fact that gravimetric methane uptakes correlate well with their corresponding pore volumes enables us to derive an empirical equation: C = -126.69 × V_p~2 + 381.62 × V_p - 12.57, where C is the excess gravimetric methane storage capacity at 35 bar and 300 K in cm~3 (STP) g~(-1) and V_p is the pore volume of a MOF material in cm~3 g~(-1). This empirical equation can predict the methane storage performance of previously reported microporous MOF materials of V_p less than 1.50 cm~3 g~(-1) reasonably well, and thus provides a convenient method to screen MOFs for methane storage purposes.
机译:研究了一系列具有可变开孔铜位和微孔空间的金属有机骨架(NOTT-100a(MOF-505a),NOTT-101a,Nott-102a,Nott-103a和NOTT-109a)作为甲烷存储的潜在吸附剂。它们对300 K和35 bar(181-196 cm〜3(STP)cm〜(-3))的甲烷具有很高的吸附能力。假设将甲烷的可输送量定义为5 bar和35 bar之间的甲烷吸附量之差,则NOTT-101a,Nott-102a和NOTT-103a表现出优异的甲烷可输送量(136-140 cm〜3( STP)cm〜(-3)),可与所有先前报道的MOF材料中的最高值相比。该MOF系列中的重量甲烷吸收量随孔隙度的增加而系统地增加,而其甲烷存储孔隙率随孔径的增加而降低。重量甲烷的吸收与其相应的孔体积密切相关的事实使我们能够得出经验公式:C = -126.69×V_p〜2 + 381.62×V_p-12.57,其中C是35 bar和300时过量的重量甲烷存储量以cm〜3(STP)g〜(-1)为单位的K,V_p为以cm〜3 g〜(-1)为单位的MOF材料的孔体积。该经验方程可以很好地预测以前报道的V_p小于1.50 cm〜3 g〜(-1)的微孔MOF材料的甲烷存储性能,从而为筛选用于甲烷存储的MOF提供了一种方便的方法。

著录项

  • 来源
    《Energy & environmental science》 |2013年第9期|2735-2744|共10页
  • 作者单位

    College of Chemistry and Life Sciences, Zhejiang Normal University, Jinhua 321004, China;

    NIST Center for Neutron Research, Gaithersburg, Maryland 20899-6102, USA,Department of Materials Science and Engineering, University of Maryland, College Park, Maryland 20742, USA;

    NIST Center for Neutron Research, Gaithersburg, Maryland 20899-6102, USA,Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104-6272, USA;

    Department of Chemistry, University of Texas at San Antonio, One UTSA Circle, San Antonio, Texas 78249-0698, USA;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号