R134a and various mixtures of R22/R134a as an alternative to R22 in vapour compression heat pumps

摘要

The performance of an air to water vapor compression heat pump has been investigated experimentally. The main purpose of this study was to investigate the possibilities of using R134a as a working fluid to replace R22 for vapor compression heat pumps. Pure R22, pure R134a and some binary mixtures of R22/R134a were considered as working fluids. The performance of the system was characterized by mixture ratio, COP and evaporator air inlet temperature. Comparisons are made between the pure refrigerants and refrigerant mixtures on the basis of the COP. Experimental results show that the mixture ratio affects the COP significantly, and the COP could be improved by using pure R134a or an appropriate mixture of R134a/R22 instead of pure R22. The maximum COP occurred at a mixture ratio of around 50/50% R134a/R22. For a mass percentage of 50% of R134a, the COP was enhanced by about average 25%.