Radiated emissions were measured for simple digital circuits designed to operate with various logic families. Emissions in the near and far field were found to depend both on the circuit layout and the choice of logic family. However, the difference in peak emissions between any two logic families was found to be independent of the circuit layout. The greatest difference in peak emissions was between high-speed 74ACT logic and low-speed 4000 CMOS logic devices, with a mean value of approximately 20 dB. Emissions from a more complex circuit were compared with the measurements on simple loop circuits. Test circuits were used to measure the propagation delay, the rise and fall times, the maximum operating frequency and the transient switching currents between two successive logic gates for each logic family. Empirical formulas have been derived that relate relative peak emissions to these switching parameters. It is hoped that these will assist designers to assess the effect of choice of logic family on electromagnetic compatibility.
展开▼
