...
首页> 外文期刊>IEEE Transactions on Dielectrics and Electrical Insulation >Effect of Crystallization Regulation on the Breakdown Strength of Metallized Polypropylene Film Capacitors
【24h】

Effect of Crystallization Regulation on the Breakdown Strength of Metallized Polypropylene Film Capacitors

机译:结晶调节对金属化聚丙烯薄膜电容器击穿强度的影响

获取原文
获取原文并翻译 | 示例
           

摘要

In this work, polypropylene (PP) film samples doped with an organic phosphorus nucleating agent under three cooling processes are examined for the effects of regulating the crystallization. The conductivity and DC breakdown strength of the film samples were tested at 25, 55 and 85 degrees C. The average breakdown strength with 0.01 wt% nucleating agent increased by approximately 25% compared to un-nucleating samples and the DC conductivity decreased slightly. For the three cooling methods in these tests, the slow process increased the crystallinity of the film samples and stabilized the electrical properties of the PP samples. It is concluded that improving the insulation performance through crystallization control is feasible, and this method shows great potential for the modification of PP films.
机译:在这项工作中,检查在三种冷却过程中掺杂有有机磷成核剂的聚丙烯(PP)膜样品用于调节结晶的影响。在25,55和85℃下测试薄膜样品的电导率和直流击穿强度。与未成核样品相比,具有0.01wt%成核剂的平均击穿强度增加约25%,并且DC电导率略有降低。对于三种冷却方法在这些测试中,缓慢的过程增加了薄膜样品的结晶度并稳定了PP样品的电性能。得出结论,通过结晶控制改善绝缘性能是可行的,该方法显示出PP薄膜改性的巨大潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号