The Interface Characterization of 2-Mercapto-1-methylimidazole Corrosion Inhibitor on Brass

摘要

This work presents a detailed surface analytical study and surface characterization, with an emphasis on the X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) analyses of 2?mercapto?1?methylimidazole (MMI) as a corrosion inhibitor for brass. First, the electrochemical measurements demonstrated a corrosion inhibition effect of MMI in a 3 wt.% NaCl solution. Next, the formation of the MMI surface layer and its properties after 1 month of immersion was analyzed with attenuated total reflectance–Fourier-transform infrared spectroscopy, atomic force microscopy, field-emission scanning electron microscopy, and contact angle analysis. Moreover, to gradually remove the organic surface layer, a gas cluster ion beam (GCIB) sputtering source at different accelerated voltages and cluster sizes was employed. After each sputtering cycle, a high-resolution XPS analysis was performed. Moreover, an angle?resolved XPS analysis was carried out for the MMI-treated brass sample to analyze the heterogeneous layered structure (the interface of the MMI organic/inorganic brass substrate). The interface properties were also investigated in detail using ToF-SIMS for spectra measurements and 2D imaging. Special attention was devoted to the possible spectral interferences for MMI?related species. The thermal stability of different MMI-related species using molecular-specific signals without possible spectral interferences was determined by performing a cooling/heating experiment associated with ToF-SIMS measurements. It was shown that these species desorbed from the brass surface in the temperature range of 310–370 °C.