首页> 外文期刊>Atmospheric chemistry and physics >Carbon and air pollutant emissions from China's cement industry 1990–2015: trends, evolution of technologies, and drivers
【24h】

Carbon and air pollutant emissions from China's cement industry 1990–2015: trends, evolution of technologies, and drivers

机译:中国水泥行业的碳和空气污染物排放1990-2015:趋势,技术演化和司机

获取原文
           

摘要

China is the largest cement producer and consumer in the world. Cement manufacturing is highly energy-intensive and is one of the major contributors to carbon dioxide ( CO 2 ) and air pollutant emissions, which threatens climate mitigation and air quality improvement. In this study, we investigated the decadal changes in carbon dioxide and air pollutant emissions for the period of 1990–2015 based on intensive unit-based information on activity rates, production capacity, operation status, and control technologies which improved the accuracy of the cement emissions in China. We found that, from 1990 to 2015, accompanied by a 10.3-fold increase in cement production, CO 2 , SO 2 , and NO x emissions from China's cement industry increased by 627?%, 56?%, and 659?%, whereas CO, PM 2.5 , and PM 10 emissions decreased by 9?%, 63?%, and 59?%, respectively. In the 1990s, driven by the rapid growth of cement production, CO 2 and air pollutant emissions increased constantly. Then, the technological innovation in production of replacing traditional shaft kilns with the new precalciner kilns equipped with high-efficiency control facilities in the 2000s markedly reduced SO 2 , CO, and PM emissions in the cement industry. In 2010, nationwide, 39?% and 31?% of the nationwide PM 2.5 and NO x emission were produced by 3?% and 15?% of the total capacity of the production lines, indicating the disproportionately high emissions from a small number of the super-polluting units. Since 2010, the growing trend of emissions has been further curbed by a combination of measures, including promoting large-scale precalciner production lines and phasing out small ones, upgrading emission standards, installing low NO x burners (LNB), and selective non-catalytic reduction (SNCR) to reduce NO x emissions, as well as adopting more advanced particulate matter control technologies. Our study highlights the effectiveness of advanced technologies on air pollutant emission control; however, CO 2 emissions from China's cement industry kept growing throughout the period, posing challenges to future carbon emission mitigation in China.
机译:中国是世界上最大的水泥生产国和消费者。水泥制造是高度能量密集型的,是二氧化碳(二氧化碳)和空气污染物排放的主要贡献者之一,威胁有气候缓解和空气质量改进。在这项研究中,我们根据基于密集的单位的活动率,生产能力,运营状态和控制技术的信息,调查了1990 - 2015年期间的二氧化碳和空气污染物排放的差异变化,其提高了水泥的准确性中国的排放量。我们发现,从1990年到2015年,伴随着10.3倍的水泥生产,二氧化碳生产,二氧化碳,2,2,没有来自中国水泥行业的X排放量增加了627?%,56?%和659?%,而CO,PM 2.5和PM 10排放量分别降低9?%,63μm和59Ω%。在20世纪90年代,通过水泥生产的快速增长,CO 2和空气污染物排放不断增加。然后,在2000年代凭借新的预钙管窑改造传统轴窑的技术创新显着降低了水泥行业的2,CO和PM排放量。 2010年,全国范围内,39?%和31?百分比全国PM 2.5,没有x排放量3?%和15?%的生产线总容量的3倍,表明少数人的不成比例的高排放量超级污染单位。自2010年以来,排放的日益增长的趋势得到了措施的结合进一步遏制,包括促进大规模的预煅烧生产线并逐步逐步逐步升级排放标准,安装低NO X燃烧器(LNB),以及选择性非催化剂减少(SNCR)减少NO X排放,以及采用更先进的颗粒物控制技术。我们的研究突出了先进技术对空气污染物排放控制的有效性;然而,中国水泥行业的二氧化碳排放在整个时期内不断增长,对中国未来的碳排放减缓构成挑战。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号