Database of petrophysical properties of the Mid-German Crystalline Rise

摘要

Petrophysical properties are a key element for reservoir characterization but also for interpreting the results of various geophysical exploration methods or geophysical well logs. Furthermore, petrophysical properties are commonly used to populate numerical models and are often critically governing the model results. Despite the common need for detailed petrophysical properties, data are still very scarce and often not available for the area of interest. Furthermore, both the online research for published property measurements or compilations, as well as dedicated measurement campaigns of the selected properties, which require comprehensive laboratory equipment, can be very time-consuming and costly. To date, most published research results are often focused on a limited selection of parameters only, and hence researching various petrophysical properties, needed to account for the thermal–hydraulic–mechanical behaviour of selected rock types or reservoir settings, can be very laborious. Since for deep geothermal energy in central Europe, the majority of the geothermal potential or resource is assigned to the crystalline basement, a comprehensive database of petrophysical properties comprising rock densities, porosity, rock matrix permeability, thermal properties (thermal conductivity and diffusivity, specific heat capacity) as well as rock mechanical properties as compressional and shear wave velocities, unconfined compressive strength, Young's modulus, Poisson's ratio, tensile strength and triaxial shear strength was compiled from measurements conducted at the HydroThermikum lab facilities of the Technical University of Darmstadt. Analysed samples were mostly derived from abandoned or active quarries and natural or artificial outcrops such as road cuts, riverbanks or steep hillslopes. Furthermore, samples of the cored deep wells Worms?3 (samples from 2175–2195?m), Stockstadt?33R (samples from 2245–2267?m), Weiterstadt?1 (samples from 2502–2504?m), Tiefbohrung Gro?-Umstadt/Heubach, B/89–B02 and the cored shallow wells (Forschungsbohrung Messel GA?1 and 2) as well as GWM17 Zwingenberg, GWM1A Zwingenberg, Langenthal?BK2/05, EWS267/1 Heubach, and archive samples of the Institut für Steinkonservierung e.V.?in Mainz originating from a comprehensive large-scale sampling campaign in 2007 were investigated. The database (Weinert et al., 2020b; https://doi.org/10.25534/tudatalib-278 ) aims to provide easily accessible petrophysical properties of the Mid-German Crystalline Rise, measured on 224 locations in Bavaria, Hessen, Rhineland-Palatinate and Thuringia and comprising 26?951 single data points. Each data point is addressed with the respective metadata such as the sample identifier, sampling location, petrography and, if applicable, stratigraphy and sampling depth (in the case of well samples).