...
首页> 外文期刊>BMC Pulmonary Medicine >Anesthesia considerations to reduce motion and atelectasis during advanced guided bronchoscopy
【24h】

Anesthesia considerations to reduce motion and atelectasis during advanced guided bronchoscopy

机译:麻醉考虑在先进引导的支气管镜检查期间减少运动和atelectasis

获取原文
   

获取外文期刊封面封底 >>

       

摘要

Partnership between anesthesia providers and proceduralists is essential to ensure patient safety and optimize outcomes. A renewed importance of this axiom has emerged in advanced bronchoscopy and interventional pulmonology. While anesthesia-induced atelectasis is common, it is not typically clinically significant. Advanced guided bronchoscopic biopsy is an exception in which anesthesia protocols substantially impact outcomes. Procedure success depends on careful ventilation to avoid excessive motion, reduce distortion causing computed tomography (CT)-to-body-divergence, stabilize dependent areas, and optimize breath-hold maneuvers to prevent atelectasis. Herein are anesthesia recommendations during guided bronchoscopy. An FiO2 of 0.6 to 0.8 is recommended for pre-oxygenation, maintained at the lowest tolerable level for the entire the procedure. Expeditious intubation (not rapid-sequence) with a larger endotracheal tube and non-depolarizing muscle relaxants are preferred. Positive end-expiratory pressure (PEEP) of up to 10–12?cm H2O and increased tidal volumes help to maintain optimal lung inflation, if tolerated by the patient as determined during recruitment. A breath-hold is required to reduce motion artifact during intraprocedural imaging (e.g., cone-beam CT, digital tomosynthesis), timed at the end of a normal tidal breath (peak inspiration) and held until pressures equilibrate and the imaging cycle is complete. Use of the adjustable pressure-limiting valve is critical to maintain the desired PEEP and reduce movement during breath-hold maneuvers. These measures will reduce atelectasis and CT-to-body divergence, minimize motion artifact, and provide clearer, more accurate images during guided bronchoscopy. Following these recommendations will facilitate a successful lung biopsy, potentially accelerating the time to treatment by avoiding additional biopsies. Application of these methods should be at the discretion of the anesthesiologist and the proceduralist; best medical judgement should be used in all cases to ensure the safety of the patient.
机译:麻醉提供者和程序论者之间的伙伴关系对于确保患者的安全和优化结果至关重要。在先进的支气管镜检查和介入性肺系统中出现了这种公理的重新重要性。虽然麻醉诱导的Atelectasis是常见的,但通常在临床上不是临床显着性。先进的引导支气管镜活检是一种例外,麻醉方案显着影响结果。程序成功取决于仔细的通风,以避免过度运动,减少失真导致计算机断层扫描(CT) - 身体分歧,稳定依赖区域,并优化呼吸持有机动,以防止大型呼吸持续管道。在引导支气管镜检查期间是麻醉建议。对于预氧化,建议将0.6至0.8的FiO2保持在整个程序的最低可容忍水平。优选具有较大的气管内管和非去极化肌肉松弛剂的迅速的插管(不是快速序列)。正端呼气压力(PEEP)高达10-12厘米H2O,并且增加潮气量有助于保持最佳的肺充气,如果患者在招聘期间确定。需要一种呼吸保持在跨型成像期间减少运动伪影(例如,锥形光束CT,数字断层合成),在正常潮气呼吸(峰值启发)的末端定时并保持直到压力平衡并且成像循环完成。使用可调节的压力限制阀对于维持所需的窥视至关重要,并减少呼吸持有操作期间的运动。这些措施将减少大规模和CT对体发散,最小化运动伪影,并在引导支气管镜检查期间提供更清晰的更准确的图像。以下这些建议将促进肺活检成功,可能通过避免额外的活组织检查来加速治疗时间。这些方法的应用应由麻醉师和程序主义自行决定;所有案例应使用最佳医疗判断以确保患者的安全性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号