Pattern recognition-based decoding method for the negative pulsed downlink signal with a narrow pulse width

摘要

The negative pulsed downlink communication system is used to send surface control commands to the downhole rotary steering tool at thousands of meters, which is a significant part of the current rotary steering technology. At present, the transmission efficiency of negative pulsed downlink communication is very low, and only simple control commands can be transmitted in a few minutes, which limits the development of rotary steering technology with complex control functions. To improve the transmission rate of the downlink system, the downlink pulse width needs to be shortened. However, due to the influence of signal transmission characteristics, the waveform of a narrow pulse width signal will be severely distorted, which increases the difficulty of decoding the downlink signal. Therefore, a decoding method based on pattern recognition for negative pulsed downlink signal with narrow pulse width is proposed in this paper, which establishes a Euclidean distance matrix model between similar characteristic signal segments on the rising or falling edge of the downlink signal, the pulse coding timing of among the signal segment with each rising or falling edge is analyzed, the decoding and recognition of the downlink instruction are achieved, which solves the problem of large timing deviation in decoding the downlink signal with a current threshold method. The experimental results show that the method proposed in this paper can achieve accurate decoding of the 6?s pulse width downlink signal. Compared with the threshold method, it can be seen that the decoding accuracy of the method proposed in this paper can be greatly improved, and the smaller the signal pulse width, the more significant the advantage.