Effects of cuspal compliance and radiant emittance of LED light on the cuspal deflection of replicated tooth cavity

摘要

The aim was to investigate effects of compliance and radiant emittance on cuspal deflection. A mesio-occluso-distal cavity was replicated using a flowable composite and steel rods with different diameters. To investigate the effect of cuspal compliance on deflection, the replicated tooth and extracted human tooth cavities were bulk-filled with a micro-hybrid composite. The replicated cavities with 2.0-mm-diameter steel rods were restored with bulk-filling of the micro-hybrid or a nano bulk-fill composite and photo-cured with four protocols. The cuspal deflection was the highest in the replicated tooth without steel rod, followed by with 1.0-, 1.5-, and 2.0-mm steel rods, and significantly lower in the human tooth. Cuspal deflections showed no significant differences among light-curing protocols, and that in the micro-hybrid composite were higher than the nano bulk-fill composite. To reduce cuspal deflection of a high compliance cavity, selecting the proper composite based on physical properties is more important than light-curing protocol.