Development of site class and site coefficient maps of Semarang, Indonesia using field shear wave velocity data

摘要

The new Indonesian National Code for seismic resistance design (SNI-03-1726-2012) issued recently utilizes seismic response spectra for the whole area of the country. Site class and site coefficient are two parameters needed for designing response spectra. Site class can be estimated using average standard penetration test (N-SPT), average shear wave velocity (Vs) and average un-drained shear strength (Su) of top 30 meter soil deposit. Site coefficients can be predicted using probabilistic seismic hazard analysis (PSHA) by implementing total probability theorem. To perform PSHA, Vs30 is a parameter needed for calculating ground motion at bedrock elevation. This paper presents the results of PSHA and site class analysis using Vs30 values estimated based on N-SPT results collected from 265 boring locations in Semarang. Seismic data in a radius of 500 km from Semarang were collected for PSHA. Site class and site coefficient maps are then developed for the whole study area.