...
首页> 外文期刊>E3S Web of Conferences >Fully undrained cyclic loading simulation on unsaturated soils using an elastoplastic model for unsaturated soils
【24h】

Fully undrained cyclic loading simulation on unsaturated soils using an elastoplastic model for unsaturated soils

机译:不饱和土壤的弹性塑料模型完全不饱和土的循环加载模拟

获取原文
           

摘要

Several researchers have reported that Bishop’s mean effective stress decreases in unsaturated soils under fully undrained cyclic loading conditions, and unsaturated soils are finally liquefied in a similar manner as saturated soils. This paper presents a series of simulations of such fully undrained cyclic loading on unsaturated soils using an elastoplastic model of the unsaturated soil. This model is formulated using the Bishop’s effective stress tensor incorporating the following concepts: the volumetric movement of the state boundary surface containing the normal consolidation line and the critical state line due to the variation in the degree of saturation, a soil water characteristic curve model considering the effect of specific volume and hysteresis, the subloading surface model, and Boyle’s law. Comparisons between the simulation results and the experimental ones show that the model agreed well with the unsaturated soil behavior under cyclic loading. Finally, the typical cyclic behavior of unsaturated soils under fully undrained conditions, such as the mechanism of liquefaction of unsaturated soils, the compression behavior, and an increase in the degree of saturation, are described through the proposed simulation results.
机译:几位研究人员据报道,主教的平均有效应力在不饱和土壤下在完全不受约束的环状负载条件下减少,并且不饱和土最终以与饱和土壤类似的方式液化。本文介绍了使用不饱和土的弹塑性模型对不饱和土壤上这种完全不饱和循环加载的一系列模拟。该模型采用主教的有效应力张量配制了以下概念:由于饱和度的变化,含有正常固结线和临界状态线的状态边界表面的容积运动,考虑到土壤水分特征曲线模型特定体积和滞后,颠覆表面模型和博伊尔法的影响。仿真结果与实验结果之间的比较表明,该模型在循环载荷下与不饱和土行为相同。最后,通过所提出的模拟结果描述了通过提出的模拟结果描述了完全不饱和条件下不饱和土壤的典型循环行为,例如不饱和土的液化机理,压缩行为和饱和程度的增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号