首页> 外文期刊>Journal of Thoracic Disease >Development of a lightweight, ‘on-bed’, portable isolation hood to limit the spread of aerosolized influenza and other pathogens
【24h】

Development of a lightweight, ‘on-bed’, portable isolation hood to limit the spread of aerosolized influenza and other pathogens

机译:开发轻量级,“床”,便携式隔离罩,以限制雾化流感和其他病原体的传播

获取原文
           

摘要

Background: The annual seasonal influenza epidemics in the winter season lead to many hospital admissions, increasing risks of nosocomial infections. Infectious diseases caused by contagious respiratory pathogens also pose a great risk to hospitals as has been seen in the current epidemic by a novel coronavirus infection. Such risk occurs in high density patient settings with few or no partitions, since the pathogens are transmitted by aerosols discharged from the patients. Possible interventions against the transmission are needed. Methods: We developed a compact, lightweight, and portable hood designed to cover just the top half of a patient sitting or lying in bed, to limit the dissemination of infectious aerosols, constructed out of lightweight pipes, transparent plastic curtains, and a fan-filter-unit (FFU). The containment efficacy of the product was tested using an aerosolized cultured influenza virus tracer and an optimal airflow rate was determined according to the test results. It was tested for use in hospital wards during the 2016–2018 influenza seasons. Results: The hood, named as Barrihood?, had dimensions height 172 cm, width 97 cm, length 38 cm, weighed 26 kg, and easily strolled and unfolded from its stored to its fully operational state of length 125 cm within a few minutes by a single operator. Optimal operational airflow-rate of the FFU was 420 L/min for containment of the aerosol particles. Eighty-one uninfected patients remained for 176 cumulative person-days within 1–4 m of influenza-infected patients isolated within the hood, without acquiring influenza infection. Conclusions: With the use of the hood, secondary influenza infection cases significantly decreased, compared to previous influenza seasons. It may be suited to hospitals with not enough/no negative pressure facilities, or without enough number of individual patient isolation rooms, and could contribute to decrease the risk of nosocomial infections.
机译:背景:冬季的年龄季节性流感流行性流行性流行病导致许多医院入院,增加了医院感染的风险。由传染性呼吸道病原体引起的传染病对医院的风险造成了很大的风险,这是目前通过新的冠状病毒感染在目前的流行病中看到的风险。这种风险发生在具有少数或没有分区的高密度患者环境中,因为病原体被从患者排出的气溶胶传输。需要对传输的可能干预。方法:我们开发了一种紧凑,轻巧和便携式的引擎盖,旨在覆盖患者坐在床上或躺在床上的上半部分,以限制传染气溶胶的传播,由轻质管道,透明塑料窗帘和风扇构成过滤器单元(FFU)。使用雾化培养的流感病毒示踪剂测试产物的容纳效果,根据测试结果确定最佳气流率。在2016 - 2018年流感季节,在医院病房中测试了它。结果:引擎盖,被命名为球,尺寸高172厘米,宽度97厘米,长38厘米,重26千克,并易于漫步并展开,在几分钟内将其存储在其完全运行状态为125厘米。单个操作员。 FFU的最佳操作气流率为420L / min,用于容纳气溶胶颗粒。八十一只未感染的患者仍然是176名累积的人 - 在引擎盖内分离的流感感染患者的1-4米内,没有获得流感感染。结论:通过使用引擎盖,与之前的流感季节相比,二级流感感染病例显着下降。它可能适用于医院,没有足够/没有负压设施,或者没有足够数量的个体患者隔离室,并且可能有助于降低医院感染的风险。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号