首页> 外文期刊>Revista rvore >STIMULATION OF LATEX PRODUCTION IN SERINGUEIRA ( HEVEA BRASILIENSIS L. ) WITH ETRHEL DOSES
【24h】

STIMULATION OF LATEX PRODUCTION IN SERINGUEIRA ( HEVEA BRASILIENSIS L. ) WITH ETRHEL DOSES

机译:用etrhel剂量刺激SeriNeira(Hevea Brasiliensis L.)的乳胶生产

获取原文
           

摘要

ABSTRACT The use of the Ethrel???? stimulant on rubber cultivation has become essential to ensure greater rubber production. When applied on the cut of the tree, this stimulant releases the ethylene gas that causes an increase of the exudation period of the latex flow. Dilutions and applications should be performed correctly so that they do not cause tapping panel dryness, which would leave the plant unproductive for a long time. Thus, the objective of this study was to evaluate the effects of increasing doses of ethrel on tapping panel dryness and rubber production of rubber tree clones. Three experiments were conducted using a randomized block design with four treatments (ethrel doses) and three replicates. The clones used were RRIM600, PR255 and PB217 submitted to doses of the stimulant Ethrel 0%, 2.5%, 3.3% and 5% with an interval of application of 30 days. The d/7 bleeding system was used. The productive performance was evaluated monthly and the total of plants with tapping panel dryness at the end of the work. All clones presented a linear positive response to increasing doses. The dose of ethrel 5% favors higher rubber yields in the three evaluated clones, but is associated with high percentage of drying. Thus, it was concluded that the production of rubber is affected positively with the increase of ethrel doses, but this increase causes a higher incidence of panel drying. Thus, it is recommended to use the ethrel 2.5% dose so the production is guaranteed without causing the tapping panel dryness.
机译:摘要使用ethrel ????橡胶栽培的兴奋剂对于确保更大的橡胶生产是必不可少的。当施加在树的切割时,该兴奋剂释放乙烯气体,导致胶乳流动的渗出周期增加。应正确执行稀释液和应用,以便它们不会导致攻丝面板干燥,这将使植物不良了很长时间。因此,本研究的目的是评估增加剂量的物质对挖掘面板干燥和橡胶树克隆橡胶生产的影响。使用具有四种处理(Ethrel剂量)和三种重复的随机嵌段设计进行了三次实验。使用的克隆是RRIM600,PB217,将兴奋剂的剂量为0%,2.5%,3.3%和5%,其施加30天。使用D / 7出血系统。在工作结束时每月评估生产性能,并在工作结束时具有挖掘面板干燥的植物。所有克隆都呈现对增加剂量的线性阳性反应。物质剂量5%的橡胶产量较高,但与高百分比的干燥有关。因此,得出结论是,橡胶的生产随着物质剂量的增加而受到阳性的影响,但这种增加导致面板干燥的发病率较高。因此,建议使用EthRER 2.5%剂量,因此可以保证生产而不会导致挖掘面板干燥。

著录项

  • 来源
    《Revista rvore》 |2018年第6期|共页
  • 作者

  • 作者单位
  • 收录信息
  • 原文格式 PDF
  • 正文语种
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号