...
首页> 外文期刊>Earth System Dynamics >Reaching 1.5 and 2.0 °C global surface temperature targets using stratospheric aerosol geoengineering
【24h】

Reaching 1.5 and 2.0 °C global surface temperature targets using stratospheric aerosol geoengineering

机译:使用Stratospheric气溶胶Geoogineering达到1.5和2.0°C全球表面温度目标

获取原文
   

获取外文期刊封面封底 >>

       

摘要

A new set of stratospheric aerosol geoengineering?(SAG) model experiments has been performed with Community Earth System Model version?2?(CESM2) with the Whole Atmosphere Community Climate Model?(WACCM6) that are based on the Coupled Model Intercomparison Project phase 6?(CMIP6) overshoot scenario?(SSP5-34-OS) as a baseline scenario to limit global warming to 1.5?or 2.0 °C above 1850–1900?conditions. The overshoot scenario allows us to applying a peak-shaving scenario that reduces the needed duration and amount of SAG application compared to a high forcing scenario. In addition, a feedback algorithm identifies the needed amount of sulfur dioxide injections in the stratosphere at four pre-defined latitudes, 30° N, 15° N, 15° S, and 30° S, to reach three surface temperature targets: global mean temperature, and interhemispheric and pole-to-Equator temperature gradients. These targets further help to reduce side effects, including overcooling in the tropics, warming of high latitudes, and large shifts in precipitation patterns. These experiments are therefore relevant for investigating the impacts on society and ecosystems. Comparisons to SAG simulations based on a high emission pathway baseline scenario?(SSP5-85) are also performed to investigate the dependency of impacts using different injection amounts to offset surface warming by SAG. We find that changes from present-day conditions around?2020 in some variables depend strongly on the defined temperature target (1.5 °C vs.?2.0 °C). These include surface air temperature and related impacts, the Atlantic Meridional Overturning Circulation, which impacts ocean net primary productivity, and changes in ice sheet surface mass balance, which impacts sea level rise. Others, including global precipitation changes and the recovery of the Antarctic ozone hole, depend strongly on the amount of SAG application. Furthermore, land net primary productivity as well as ocean acidification depend mostly on the global atmospheric CO2 concentration and therefore the baseline scenario. Multi-model comparisons of experiments that include strong mitigation and carbon dioxide removal with some SAG application are proposed to assess the robustness of impacts on societies and ecosystems.
机译:一系列新的平坦气旋气溶胶GeoEngineering?(SAG)模型实验已经使用社区地球系统模型版本?2?(CESM2)与整个大气群落气候模型(WACCM6)为基础的耦合模型相互熟悉项目阶段6 ?(CMIP6)过冲方案?(SSP5-34-OS)作为基线方案,以将全球变暖限制为1.5?或2.0°C以上1850-1900?条件。与高强迫方案相比,过冲方案允许我们应用峰值剃须场景,从而减少所需的持续时间和凹陷应用程序量。此外,反馈算法在四个预定鉴定的纬度,30°N,15°N,15°S和30°S中识别平流层所需的二氧化硫注射量,以达到三个表面温度目标:全球平均值温度,斜际和极均衡温度梯度。这些目标进一步有助于减少副作用,包括在热带地区过冷,高纬度的加热,以及降水模式的大移位。因此,这些实验与调查对社会和生态系统的影响有关。还基于高发射途径基线场景的SAG模拟比较(SSP5-85),以研究使用不同喷射量的影响的依赖性,以通过凹陷偏移偏移。我们发现,在某些变量中的当今条件发生变化,在某些变量中强烈依赖于定义的温度目标(1.5°C vs.2.0°C)。这些包括表面空气温度和相关的影响,大西洋化的倾覆循环,影响海洋净初级生产力,以及冰盖表面质量平衡的变化,影响海平面上升。其他,包括全球降水变化和南极臭氧孔的恢复,强烈依赖于SAG应用量。此外,土地净初级生产力以及海洋酸化主要依赖于全球大气二氧化碳浓度,从而依赖于基线情景。提出了包括强烈减缓和二氧化碳除去一些SAG应用的多模型比较,以评估对社会和生态系统的影响的稳健性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号