...
首页> 外文期刊>Scientific reports. >Chemical and Structural Stability of Lithium-Ion Battery Electrode Materials under Electron Beam
【24h】

Chemical and Structural Stability of Lithium-Ion Battery Electrode Materials under Electron Beam

机译:电子束作用下锂离子电池电极材料的化学和结构稳定性

获取原文
           

摘要

The investigation of chemical and structural dynamics in battery materials is essential to elucidation of structure-property relationships for rational design of advanced battery materials. Spatially resolved techniques, such as scanning/transmission electron microscopy (S/TEM), are widely applied to address this challenge. However, battery materials are susceptible to electron beam damage, complicating the data interpretation. In this study, we demonstrate that, under electron beam irradiation, the surface and bulk of battery materials undergo chemical and structural evolution equivalent to that observed during charge-discharge cycling. In a lithiated NiO nanosheet, a Li2CO3-containing surface reaction layer (SRL) was gradually decomposed during electron energy loss spectroscopy (EELS) acquisition. For cycled LiNi0.4Mn0.4Co0.18Ti0.02O2 particles, repeated electron beam irradiation induced a phase transition from an layered structure to an rock-salt structure, which is attributed to the stoichiometric lithium and oxygen removal from 3a and 6c sites, respectively. Nevertheless, it is still feasible to preserve pristine chemical environments by minimizing electron beam damage, for example, using fast electron imaging and spectroscopy. Finally, the present study provides examples of electron beam damage on lithium-ion battery materials and suggests that special attention is necessary to prevent misinterpretation of experimental results.
机译:对电池材料中化学和结构动力学的研究对于阐明合理设计高级电池材料的结构-特性关系至关重要。空间分辨技术,例如扫描/透射电子显微镜(S / TEM),已广泛应用于应对这一挑战。但是,电池材料容易受到电子束的损坏,从而使数据解释变得复杂。在这项研究中,我们证明,在电子束辐照下,电池材料的表面和主体经历的化学和结构演变与充放电循环期间所观察到的化学和结构相当。在锂化的NiO纳米片中,获取电子能量损失谱(EELS)的过程中,含Li 2 CO 3 的表面反应层(SRL)逐渐分解。对于循环的LiNi 0.4 Mn 0.4 Co 0.18 Ti 0.02 O 2 颗粒,重复电子束辐照诱导了从层状结构到岩石盐结构的相变,这分别归因于化学计量的从3a和6c位置去除的锂和氧。然而,例如通过使用快速电子成像和光谱法通过最小化电子束损伤来保持原始化学环境仍然是可行的。最后,本研究提供了对锂离子电池材料造成电子束损伤的示例,并建议需要特别注意以防止对实验结果的误解。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号