APS -APS March Meeting 2017 - Event - Adhesion of Blended Polymer Films.

摘要

The adhesive energy of blended and monolithic PCL and PCL-N6 surfaces was measured by blister method and linked to the surface composition of the blended samples. It was shown that PCL does not adhere to N6 after heat-treatment at 55 C, while the monolithic PCL films adhered to the blended samples solely via the PCL islands at the surface. The surface concentration of PCL in the blended samples was established using the novel staining method. It was shown that the surface concentration of PCL differs from its bulk content in the blended samples. The measurements also revealed that the surface concentration of PCL is practically linearly proportionality to the normalized adhesion energy between the blended PCL-N6 samples and monolithic PCL films. Several statistical characteristics of the surfaces of the blended samples were used to characterize their uniformityon-uniformity. It was shown that increasing the surface uniformity of the adhering component in the blended samples (PCL), one increases the adhesion energy. Moreover, at about 70{%} of PCL at the surface, the adhesion energy of blended samples to monolithic PCL films could reach the value characterization of the adhesion between two monolithic PCL samples.