Shape distortion analysis of drawing die by optical 3D scanning

摘要

The contribution dealing with analysis of drawing die shape distortion using optical 3D scanning. The wear of drawing die has a significant influence on the shape stability of the produced tubes. Early identification and determination of wear on the drawing die leads to elimination of production errors. Metrological measuring systems can be used to analyse shape distortion. The optical 3D scanner GOM ATOS II TripleScan SO MV170 (measuring volume: 170 × 130 × 130 mm; camera resolution 2448 × 2050 px (5 Mpx); measuring point distance: 0.07059 mm) was used for experimental measurement of drawing die. The 3D scanned weared drawing die was compared with the reference CAD model. The result of the comparison is the colour deviation map of drawing die’s shape and various inspection sections.