...
首页> 外文期刊>Bulletin of the Korean Chemical Society >Synthesis and Characterization of Lead Zirconate Titanate Nanofibers Obtained by Electrospinning
【24h】

Synthesis and Characterization of Lead Zirconate Titanate Nanofibers Obtained by Electrospinning

机译:静电纺丝法合成锆钛酸铅钛纳米纤维及其表征

获取原文

摘要

In this study, lead zirconate titanate (PZT) nanofibers were synthesized by electrospinning method using polyvinylpyrrolidone (PVP) as a viscosity controller and were characterized the crystallinity and the chemical composition of PZT nanofibers obtained by different postannealing methods. From the Xa??ray photoelectron spectroscopy results, the formation of PZT nanofibers was confirmed. The diameter of PZT nanofibers was a few hundreds of nanometers. And the diameter of PZTa??D (directly annealed to the target temperature) nanofibers decreased as the annealing temperature increased while the diameter of PZTa??S (stepwisely annealed to the target temperature) nanofibers increased which were confirmed by SEM. According to the results of Xa??ray diffraction, as the annealing temperature increased, the crystallinity of PZT nanofibers changed from pyrochlore to perovskite structure and the perovskite phase of PZT was observed from the PZT nanofibers annealed at 823a??K.
机译:本研究以聚乙烯吡咯烷酮(PVP)为黏度调节剂,通过电纺法合成了锆钛酸铅(PZT)纳米纤维,并表征了不同后退火方法得到的PZT纳米纤维的结晶度和化学组成。从Xa射线光电子能谱结果,证实了PZT纳米纤维的形成。 PZT纳米纤维的直径为几百纳米。并且,随着退火温度的升高,PZTa 12 D(直接退火至目标温度)纳米纤维的直径减小,而PZTa 12 S(逐步退火至目标温度)纳米纤维的直径随着SEM的增加而减小。根据Xa射线衍射的结果,随着退火温度的升高,PZT纳米纤维的结晶度从烧绿石变成钙钛矿结构,并且在823aKK退火的PZT纳米纤维中观察到PZT的钙钛矿相。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号