首页> 外文期刊>Journal of Oral Science >Comparing the occlusal contact area of individual teeth during low-level clenching
【24h】

Comparing the occlusal contact area of individual teeth during low-level clenching

机译:比较低位咬合过程中单个牙齿的咬合接触面积

获取原文
           

摘要

The aim of this study was to investigate the occlusal contact area (OCA) in individual teeth during low-level tooth clenching in 24 healthy participants. Before measurements were made, the 100% maximum voluntary contraction (MVC) was determined. At baseline, all subjects were instructed to close their mouth and touch the opposing teeth with minimal force. Occlusal contact was recorded during three jaw motor tasks (baseline, 20% MVC, and 40% MVC) using a blue silicone material. OCA thickness was determined from images and defined on five levels: level 1 (0-149 μm), level 2 (0-89 μm), level 3 (0-49 μm), level 4 (0-29 μm), and level 5 (0-4 μm). Premolar and molar OCAs increased significantly from baseline to 20% MVC and 40% MVC. The OCA of each anterior tooth did not change significantly with increasing clenching intensity at all levels. Our findings suggest that premolar and molar OCAs may be altered by low-intensity clenching, affecting the teeth and periodontal tissues.
机译:这项研究的目的是调查24位健康参与者在低水平握紧牙齿期间单个牙齿的咬合接触面积(OCA)。在进行测量之前,先确定100%最大自愿收缩(MVC)。在基线时,指示所有受试者闭口并以最小的力接触相对的牙齿。使用蓝色硅树脂材料记录了三项下颌运动任务(基线,20%MVC和40%MVC)的咬合接触。根据图像确定OCA厚度,并将其定义为五个级别:级别1(0-149μm),级别2(0-89μm),级别3(0-49μm),级别4(0-29μm)和级别5(0-4微米)。前磨牙和磨牙OCA从基线明显增加到20%MVC和40%MVC。在所有水平上,每个前牙的OCA都不会随着握紧强度的增加而发生显着变化。我们的发现表明,低强度咬合可能会改变前磨牙和磨牙OCA,影响牙齿和牙周组织。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号