A Study of Surface Modifications of Carbon Nanotubes on the Properties of Polyamide 66/Multiwalled Carbon Nanotube Composites

摘要

The effects of surface modification of carbon nanotube on the properties of polyamide 66/multiwalled carbon nanotube composites have been investigated. Polyamide 66 (PA66) and multiwalled carbon nanotube (MWCNT) composites were prepared by melt mixing. The surfaces of MWCNTs were modified with acid- and amine-groups. Field emission scanning electron microscopy analyses revealed that amine-MWCNTs (D-MWCNTs) dispersed better in the PA66 matrix than pristine- and acid-MWCNTs. However, an introduction of D-MWCNTs into PA66 matrix induced heterogeneous nucleation and affected the crystal growth process during the crystallization of PA66/MWCNT composites. Both nanoindentation and friction analyses were carried out in a study of the effect of the introduction of modified MWCNTs on both mechanical and friction properties of the composites. With the introduction of D-MWCNTs, both nanohardness and elastic modulus of the composites were significantly improved, but it was observed that the maximum depth, nanohardness, and elastic modulus of the composites showed no distinct change before and after a friction test. It is evident that PA66/D-MWCNT composites have the least friction coefficient of the PA66/MWCNT composites of all the approaches of carbon nanotube surface modification.