...
首页> 外文期刊>Journal of Mining and Metallurgy, Section B: Metallurgy >Desulfurization kinetics of high lead and zinc sulfide containing slag with oxygen blowing
【24h】

Desulfurization kinetics of high lead and zinc sulfide containing slag with oxygen blowing

机译:吹氧法去除高铅和硫化锌高炉渣的脱硫动力学

获取原文
           

摘要

The desulfurization process of lead and zinc slag is an important smelting process to obtain lead and zinc. The aim of this paper is to study the desulfurization process of high lead and zinc sulfide containing slag with oxygen blowing. The predominance area diagrams of the Pb-Zn-Fe-S-O system (Pb/(Fe+Pb+Zn)=0.176, Zn/(Fe+Pb+Zn)=0.56) at various temperature were thermodynamically constructed. The physical properties, the chemical composition and the phase transformation of the desulfurization slag were investigated. The thermodynamic results indicated that lead, zinc, and iron can be oxidized to form high lead and zinc slag. The experimental results illustrated that the sulfur content in the oxidation slag can be reduced to less than 1% as temperature increased up to 1573 K. The XRD analysis of as-quenched slag shows the PbS and ZnS phase decreased, while zincite and spinel phase (ZnxFe3-xO4+y) emerged and increased as the reaction time increased. The desulfurization process of molten slag were considered to be the first-order reaction and the apparent activation energy was estimated to be 44.46 kJ/mol. Under the experimental conditions, the mass transfer in the gas and liquid phase was likely to be the restrictive step.
机译:铅锌渣的脱硫过程是获得铅锌的重要冶炼过程。本文的目的是研究吹氧法对高铅和硫化锌高炉渣的脱硫工艺。热力学构建了不同温度下Pb-Zn-Fe-S-O体系的主要区域图(Pb /(Fe + Pb + Zn)= 0.176,Zn /(Fe + Pb + Zn)= 0.56)。研究了脱硫渣的物理性质,化学组成和相变。热力学结果表明铅,锌和铁可以被氧化形成高铅和锌渣。实验结果表明,随着温度升高至1573 K,氧化渣中的硫含量可降低至小于1%。淬火渣的XRD分析表明PbS和ZnS相降低,而锌矿和尖晶石相( ZnxFe3-xO4 + y)随着反应时间的增加而出现并增加。熔融炉渣的脱硫过程被认为是一级反应,其表观活化能估计为44.46 kJ / mol。在实验条件下,气相和液相中的传质可能是限制性步骤。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号