...
首页> 外文期刊>Journal of Dentistry of Tehran University of Medical Sciences >MARGINAL ADAPTATION OF INDIRECT COMPOSITE, GLASS-CERAMIC INLAYS AND DIRECT COMPOSITE: AN IN VITRO EVALUATION
【24h】

MARGINAL ADAPTATION OF INDIRECT COMPOSITE, GLASS-CERAMIC INLAYS AND DIRECT COMPOSITE: AN IN VITRO EVALUATION

机译:间接复合材料,玻璃陶瓷嵌体和直接复合材料的边缘适应性:体外评估

获取原文

摘要

Objective: This experimental in vitro study compared marginal adaptation of indirect composite, glass-ceramic inlays and direct composite.Materials and Methods: Seventy-five recently extracted human molars were randomly divided into three groups (n=25) and mesio-occluso-distal cavities with the same dimensions were prepared in the teeth. Indirect composite and glass-ceramic inlays were fabricated following manufacturer's instructions and the marginal gap was measured by a stereomicroscope at magnification 40x before cementation. After cementation of inlays and restoring the third group by direct composite, all the specimens were thermocycled and the marginal gaps were measured exactly as previously described. Repeated measure ANOVA and post-hoc Tukey test were used for pairwise comparison of occlusal, proximal, and gingival marginal gaps in each group. One-way ANOVA and post-hoc Tukey test were used for comparison of mean marginal gap in the three groups and for comparison of marginal gap before and after cementation in inlays, paired T-test was used.Results: The marginal gap of direct composite (19.96 m m) was significantly lower than that of indirect composite inlay (48.47 m m), which in itself was significantly lower than that of glass-ceramic inlay (60.96 m m). In all the restorations, marginal gap in the gingival margin was significantly higher than occlusal and proximal margins. The marginal gap of inlays did not change after cementation and thermocycling.Conclusion: This study indicated that the marginal gaps of the evaluated restorations are less than 100 m m, which is clinically acceptable.
机译:目的:这项体外实验研究比较了间接复合材料,玻璃陶瓷嵌体和直接复合材料的边缘适应性。材料与方法:将最近提取的75颗人类磨牙随机分为三组(n = 25)和近中牙-远牙在牙齿上准备了相同尺寸的牙洞。间接复合材料和玻璃陶瓷镶嵌物是按照制造商的说明进行制造的,在胶凝之前,通过立体显微镜以40倍的放大倍数测量边缘间隙。镶嵌物胶合并通过直接复合材料恢复第三组后,将所有样品进行热循环,并按照前述方法精确测量边缘间隙。重复测量方差分析和事后Tukey测试用于成对比较各组的咬合,近端和牙龈边缘间隙。采用单向方差分析和事后Tukey检验比较三组的平均边缘间隙,比较嵌体胶合前后的边缘间隙,采用配对T检验。结果:直接复合材料的边缘间隙(19.96 mm)显着低于间接复合嵌体(48.47 mm),其本身显着低于玻璃陶瓷嵌体(60.96 mm)。在所有的修复体中,牙龈边缘的边缘间隙明显高于咬合和近端边缘。固结和热循环后,嵌体的边缘间隙没有改变。结论:这项研究表明,所评估的修复体的边缘间隙小于100 m m,在临床上是可以接受的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号