...
首页> 外文期刊>Journal of Applied Oral Science >Effect of different composite core materials on fracture resistance of endodontically treated teeth restored with FRC posts
【24h】

Effect of different composite core materials on fracture resistance of endodontically treated teeth restored with FRC posts

机译:不同复合核心材料对FRC桩修复牙髓治疗牙齿抗断裂性能的影响

获取原文

摘要

PANITIWAT, Prapaporn ?and? SALIMEE, Prarom. Effect of different composite core materials on fracture resistance of endodontically treated teeth restored with FRC posts. J. Appl. Oral Sci. [online]. 2017, vol.25, n.2, pp.203-210. ISSN 1678-7757.? http://dx.doi.org/10.1590/1678-77572016-0306. Objective This study evaluated the fracture resistance of endodontically treated teeth restored with fiber reinforced composite posts, using three resin composite core build-up materials, (Clearfil Photo Core (CPC), MultiCore Flow (MCF), and LuxaCore Z-Dual (LCZ)), and a nanohybrid composite, (Tetric N-Ceram (TNC)). Material and Methods Forty endodontically treated lower first premolars were restored with quartz fiber posts (D.T. Light-Post) cemented with resin cement (Panavia F2.0). Samples were randomly divided into four groups (n=10). Each group was built-up with one of the four core materials following its manufacturers’ instructions. The teeth were embedded in acrylic resin blocks. Nickel-Chromium crowns were fixed on the specimens with resin cement. The fracture resistance was determined using a universal testing machine with a crosshead speed of 1 mm/min at 1350 to the tooth axis until failure occurred. All core materials used in the study were subjected to test for the flexural modulus according to ISO 4049:2009. Results One-way ANOVA and Bonferroni multiple comparisons test indicated that the fracture resistance was higher in the groups with CPC and MCF, which presented no statistically significant difference (p>0.05), but was significantly higher than in those with LCZ and TNC (p<0.05). In terms of the flexural modulus, the ranking from the highest values of the materials was aligned with the same tendency of fracture loads. Conclusion Among the cores used in this study, the composite core with high filler content tended to enhance fracture thresholds of teeth restored with fiber posts more than others.
机译:PANITIWAT,Prapaporn吗?萨利米,普拉姆。不同复合芯材料对FRC桩修复的牙髓治疗牙齿的抗断裂性的影响。 J.应用口腔科学[线上]。 2017,Vol.25,n.2,第203-210页。 ISSN 1678-7757。? http://dx.doi.org/10.1590/1678-77572016-0306。目的本研究使用三种树脂复合材料核心堆积材料(Clearfil光核(CPC),MultiCore Flow(MCF)和LuxaCore Z-Dual(LCZ))评估用纤维增强复合材料桩修复的牙髓治疗牙齿的抗断裂性)和纳米杂化复合材料(Tetric N-Ceram(TNC))。材料和方法用树脂纤维水泥(Panavia F2.0)粘合的石英纤维桩(D.T. Light-Post)修复了40例经牙髓治疗的下部第一前磨牙。将样品随机分为四组(n = 10)。每个小组都按照制造商的指示组装了四种核心材料之一。牙齿嵌入丙烯酸树脂块中。用树脂水泥将镍铬冠固定在样品上。使用万能试验机测定抗断裂性,其十字头速度为1350 /齿,直至齿轴,直到发生故障。研究中使用的所有芯材均根据ISO 4049:2009进行了弯曲模量测试。结果单因素方差分析和Bonferroni多重比较测试表明CPC和MCF组的骨折抵抗力较高,差异无统计学意义(p> 0.05),但显着高于LCZ和TNC组(p <0.05)。就挠曲模量而言,从材料的最高值开始的排名与断裂载荷的相同趋势保持一致。结论在这项研究中使用的芯中,具有高填充量的复合芯比其他纤维芯更倾向于增强用纤维桩修复的牙齿的断裂阈值。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号