...
首页> 外文期刊>Journal of applied clinical medical physics / >Commissioning of a 3D image‐based treatment planning system for high‐dose‐rate brachytherapy of cervical cancer
【24h】

Commissioning of a 3D image‐based treatment planning system for high‐dose‐rate brachytherapy of cervical cancer

机译:宫颈癌大剂量近距离放射治疗的基于3D图像的治疗计划系统的调试

获取原文

摘要

The objective of this work is to present commissioning procedures to clinically implement a three-dimensional (3D), image-based, treatment-planning system (TPS) for high-dose-rate (HDR) brachytherapy (BT) for gynecological (GYN) cancer. The physical dimensions of the GYN applicators and their values in the virtual applicator library were varied by 0.4 mm of their nominal values. Reconstruction uncertainties of the titanium tandem and ovoids (T&O) were less than 0.4 mm on CT phantom studies and on average between 0.8-1.0 mm on MRI when compared with X-rays. In-house software, HDRCalculator, was developed to check HDR plan parameters such as independently verifying active tandem or cylinder probe length and ovoid or cylinder size, source calibration and treatment date, and differences between average Point A dose and prescription dose. Dose-volume histograms were validated using another independent TPS. Comprehensive procedures to commission volume optimization algorithms and process in 3D image-based planning were presented. For the difference between line and volume optimizations, the average absolute differences as a percentage were 1.4% for total reference air KERMA (TRAK) and 1.1% for Point A dose. Volume optimization consistency tests between versions resulted in average absolute differences in 0.2% for TRAK and 0.9 s (0.2%) for total treatment time. The data revealed that the optimizer should run for at least 1 min in order to avoid more than 0.6% dwell time changes. For clinical GYN T&O cases, three different volume optimization techniques (graphical optimization, pure inverse planning, and hybrid inverse optimization) were investigated by comparing them against a conventional Point A technique. End-to-end testing was performed using a T&O phantom to ensure no errors or inconsistencies occurred from imaging through to planning and delivery. The proposed commissioning procedures provide a clinically safe implementation technique for 3D image-based TPS for HDR BT for GYN cancer.PACS number(s): 87.55.D-
机译:这项工作的目的是提出调试程序,以临床实现针对妇科(GYN)的高剂量率(HDR)近距离治疗(BT)的三维(3D),基于图像的治疗计划系统(TPS)癌症。 GYN涂抹器的物理尺寸及其在虚拟涂抹器库中的值与标称值相差0.4毫米。与X射线相比,CT体模研究中钛串联和卵形(T&O)的重建不确定性小于0.4 mm,而MRI的重建不确定性平均在0.8-1.0 mm之间。开发了内部软件HDRCalculator来检查HDR计划参数,例如独立验证主动串联或圆柱探针长度和卵形或圆柱尺寸,来源校准和治疗日期以及平均Point A剂量和处方剂量之间的差异。使用另一个独立的TPS验证剂量-体积直方图。提出了在3D图像计划中委托量优化算法和过程的综合程序。对于管路和体积优化之间的差异,总参考空气KERMA(TRAK)的平均绝对差异百分比为1.4%,A点剂量的平均值为1.1%。两个版本之间的体积优化一致性测试导致TRAK的平均绝对差异为0.2%,总处理时间为0.9 s(0.2%)。数据显示,优化器应运行至少1分钟,以避免超过0.6%的停留时间变化。对于临床GYN T&O案例,通过将它们与常规Point A技术进行比较,研究了三种不同的体积优化技术(图形优化,纯逆规划和混合逆优化)。使用T&O体模进行了端到端测试,以确保从成像到计划和交付期间都不会发生错误或不一致。拟议的调试程序为GYN癌症的HDR BT的基于3D图像的TPS提供了临床安全的实施技术.PACS编号:87.55.D-

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号