...
首页> 外文期刊>Digital biomarkers. >Inertial Sensor Technology Can Capture Changes in Dynamic Balance Control during the Y Balance Test
【24h】

Inertial Sensor Technology Can Capture Changes in Dynamic Balance Control during the Y Balance Test

机译:惯性传感器技术可以捕获Y平衡测试过程中动态平衡控制的变化

获取原文
           

摘要

Introduction: The Y Balance Test (YBT) is one of the most commonly utilised clinical dynamic balance assessments. Research has demonstrated the utility of the YBT in identifying balance deficits in individuals following lower limb injury. However, quantifying dynamic balance based on reach distances alone fails to provide potentially important information related to the quality of movement control and choice of movement strategy during the reaching action. The addition of an inertial sensor to capture more detailed motion data may allow for the inexpensive, accessible quantification of dynamic balance control during the YBT reach excursions. As such, the aim of this study was to compare baseline and fatigued dynamic balance control, using reach distances and 95EV (95% ellipsoid volume), and evaluate the ability of 95EV to capture alterations in dynamic balance control, which are not detected by YBT reach distances. Methods: As part of this descriptive laboratory study, 15 healthy participants completed repeated YBTs at 20, 10, and 0 min prior to and following a modified 60-s Wingate test that was used to introduce a short-term reduction in dynamic balance capability. Dynamic balance was assessed using the standard normalised reach distance method, while dynamic balance control during the reach attempts was simultaneously measured by means of the 95EV derived from an inertial sensor, worn at the level of the 4th lumbar vertebra. Results: Intraclass correlation coefficients for the inertial sensor-derived measures ranged from 0.76 to 0.92, demonstrating strong intrasession test-retest reliability. Statistically significant alterations ( p 0.05) in both reach distance and the inertial sensor-derived 95EV measure were observed immediately post-fatigue. However, reach distance deficits returned to baseline levels within 10 min, while 95EV remained significantly increased ( p 0.05) beyond 20 min for all 3 reach distances. Conclusion: These findings demonstrate the ability of an inertial sensor-derived measure to quantify alterations in dynamic balance control, which are not captured by traditional reach distances alone. This suggests that the addition of an inertial sensor to the YBT may provide clinicians and researchers with an accessible means to capture subtle alterations in motor function in the clinical setting.
机译:简介:Y平衡测试(YBT)是最常用的临床动态平衡评估之一。研究表明,YBT可用于识别下肢损伤后个体的平衡缺陷。但是,仅根据到达距离来量化动态平衡并不能提供与动作过程中运动控制质量和运动策略选择有关的潜在重要信息。添加惯性传感器以捕获更详细的运动数据可以在YBT到达偏移期间实现动态平衡控制的廉价,可访问的量化。因此,本研究的目的是比较基线和疲劳动态平衡控制,使用到达距离和95EV(95%椭球体积),并评估95EV捕获动态平衡控制中未由YBT检测到的变化的能力到达距离。方法:作为描述性实验室研究的一部分,有15位健康的参与者在经过改进的60-s Wingate测试之前和之后20分钟,10分钟和0分钟完成了重复的YBT,该测试用于短期降低动平衡能力。使用标准归一化到达距离方法评估动平衡,同时通过从惯性传感器获得的95EV(佩戴在第4腰椎水平处)同时测量到达尝试期间的动平衡控制。结果:用于惯性传感器的测量的类内相关系数在0.76至0.92的范围内,这表明会话间重新测试的可靠性很高。疲劳后立即观察到到达距离和惯性传感器得出的95EV测量值的统计上显着变化(p <0.05)。但是,到达距离缺陷在10分钟内恢复到基线水平,而对于所有3个到达距离,超过20分钟后95EV仍显着增加(p <0.05)。结论:这些发现证明了惯性传感器衍生的方法能够量化动态平衡控制中的变化,而传统的触碰距离无法单独捕获这些变化。这表明在YBT上增加惯性传感器可能为临床医生和研究人员提供一种可获取的方法,以捕获临床环境中运动功能的细微变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号