...
首页> 外文期刊>Dental Materials Journal >Viscoelastic properties of low-shrinking composite resins compared to packable composite resins
【24h】

Viscoelastic properties of low-shrinking composite resins compared to packable composite resins

机译:与可包装复合树脂相比,低收缩复合树脂的粘弹性能

获取原文
   

获取外文期刊封面封底 >>

       

摘要

The aim of this study was to evaluate the viscoelastic properties of novel low-shrinking composites and compare them to those of packable composites. Six materials were tested: Clearfil Majesty Posterior (CM), ELS Extra Low Shrinkage (EL), Filtek P60 (FP), Filtek Silorane (FS), Prodigy (PR) and Surefil (SU). Static and dynamic testing was performed and materials were tested dry and wet at different temperatures (21°C to 50°C). Shear and flexural modulus, loss tangent, dynamic viscosity, Poisson’s ratio and creep recovery were calculated among others. Significant differences were found both between the two groups and between materials belonging to the same group. CM presented the highest shear and flexural modulus and EL the lowest. All materials were softened by an increase of temperature, while FS was the least affected by water and PR showed to be the most susceptible. Different approaches used to overcome polymerization shrinkage lead to materials with different properties.
机译:这项研究的目的是评估新型低收缩复合材料的粘弹性,并将其与可包装复合材料的粘弹性进行比较。测试了六种材料:Clearfil je下后方(CM),ELS超低收缩率(EL),Filtek P60(FP),Filtek Silorane(FS),Prodigy(PR)和Surefil(SU)。进行静态和动态测试,并在不同温度(21°C至50°C)下对材料进行干湿测试。其中还计算了剪切和弯曲模量,损耗角正切,动态粘度,泊松比和蠕变回复率。在两组之间以及属于同一组的材料之间都发现了显着差异。 CM的剪切模量和弯曲模量最高,EL的最低。温度升高使所有材料软化,而FS受水的影响最小,而PR最易受影响。用于克服聚合收缩的不同方法导致材料具有不同的性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号