首页> 外文期刊>Dental Research Journal >Shear bond strength and scanning electron microscopy characteristics of universal adhesive in primary tooth dentin: An in vitro study
【24h】

Shear bond strength and scanning electron microscopy characteristics of universal adhesive in primary tooth dentin: An in vitro study

机译:乳牙通用粘接剂的剪切粘结强度和扫描电镜特征:体外研究

获取原文
           

摘要

Background: The aim of the study was to evaluate the adhesion of Scotchbond Universal Adhesive to primary tooth dentin by measuring shear bond strength (SBS) and observing morphological changes with scanning electron microscopy (SEM). Materials and Methods: In this in vitro study, a total of 60 primary canine teeth were randomly divided into 5 groups (n = 12). The study groups were (1) Phosphoric acid etching + Adper Single Bond 2 (control), (2) phosphoric acid etching + Scotchbond Universal (etch?and?rinse), (3) Scotchbond Universal (self?etch), (4) phosphoric acid etching + Scotchbond Universal + resin, and (5) Scotchbond Universal + resin. Composite cylinders were built on the tooth surface, and 10 samples in each group were selected for SBS testing and identification of the failure modes. Two samples from each group were observed by SEM. One?way ANOVA and Tukey honestly significant difference post hoc test were used for data analysis P value < 0.05 was considered statistically significant. Results: The results showed that SBS in Group 1 was significantly lower than in Groups 2, 3, and 4 (all P < 0.001). There was no significant difference between Groups 2 and 3 (P = 0.98), or between Groups 3 and 4 (P = 0.97). There was no significant difference between Groups 2 and 4 (P = 0.999) or between Groups 1 and 5 (P = 0.156). Mixed and cohesive failures were more frequent in Groups 2, 3 and 4. SEM observations showed that applying phosphoric acid to the dentin before Scotchbond Universal adhesive resulted in more open dentinal tubules and more resin tag impregnation. Conclusion: There was no significant difference in SBS between Scotchbond Universal Adhesive in etch?and?rinse and self?etching modes. The SBS of Scotchbond Universal Adhesive in etch?and?rinse mode was greater than Adper Single Bond 2. Key Words: Adhesive, bond strength, primary teeth, scanning electron microscopy, universal.
机译:背景:本研究的目的是通过测量剪切粘结强度(SBS)并通过扫描电子显微镜(SEM)观察形态变化,来评估Scotchbond Universal Adhesive粘合剂对乳牙的粘附性。材料和方法:在这项体外研究中,总共60颗原犬牙被随机分为5组(n = 12)。研究小组是(1)磷酸蚀刻+ Adper单键2(对照),(2)磷酸蚀刻+ Scotchbond Universal(蚀刻和冲洗),(3)Scotchbond Universal(自蚀刻),(4)磷酸蚀刻+ Scotchbond Universal +树脂,以及(5)Scotchbond Universal +树脂。将复合材料圆柱体构建在牙齿表面上,并从每组中选择10个样品进行SBS测试和确定失效模式。通过SEM观察每组的两个样品。事后检验采用单因素方差分析和Tukey进行的显着性差异进行数据分析。P<0.05被认为具有统计学意义。结果:结果显示,第1组的SBS显着低于第2、3和4组(所有P <0.001)。第2组和第3组之间(P = 0.98)或第3组和第4组之间(P = 0.97)没有显着差异。第2组和第4组之间(P = 0.999)或第1组和第5组之间(P = 0.156)没有显着差异。在第2、3和4组中,混合失败和内聚性失败更为频繁。SEM观察表明,在Scotchbond Universal粘合剂之前将磷酸施加到牙本质上会导致更开放的牙本质小管和更多的树脂标签浸渍。结论:Scotchbond万能胶在SBS和SBS之间没有显着差异。 Scotchbond通用胶在蚀刻和冲洗模式下的SBS大于Adper Single Bond2。关键词:胶,粘合强度,乳齿,扫描电子显微镜,通用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号