首页> 外文期刊>Water >Watershed Variability in Streambank Erodibility and Implications for Erosion Prediction
【24h】

Watershed Variability in Streambank Erodibility and Implications for Erosion Prediction

机译:河岸可蚀性中的分水岭变化及其对侵蚀预测的意义

获取原文
           

摘要

Two fluvial erosion models are commonly used to simulate the erosion rate of cohesive soils: the empirical excess shear stress model and the mechanistic Wilson model. Both models include two soil parameters, the critical shear stress ( τ c ) and the erodibility coefficient ( k d ) for the excess shear stress model and b 0 and b 1 for the Wilson model. Jet erosion tests (JETs) allow for in-situ determination of these parameters. JETs were completed at numerous sites along two streams in each the Illinois River and Fort Cobb Reservoir watersheds. The objectives were to use JET results from these streambank tests to investigate variability of erodibility parameters on the watershed scale and investigate longitudinal trends in streambank erodibility. The research also determined the impact of this variability on lateral retreat predicted by a process-based model using both the excess shear stress model and the Wilson model. Parameters derived from JETs were incorporated into a one-dimensional process-based model to simulate bank retreat for one stream in each watershed. Erodibility parameters varied by two to five and one to two orders of magnitude in the Illinois River watershed and Fort Cobb Reservoir watershed, respectively. Less variation was observed in predicted retreat by a process-based model compared to the input erodibility parameters. Uncalibrated erodibility parameters and simplified applied shear stress estimates failed to match observed lateral retreats suggesting the need for model calibration and/or advanced flow modeling.
机译:通常使用两种河道侵蚀模型来模拟粘性土的侵蚀速率:经验过量切应力模型和机制威尔逊模型。两种模型都包括两个土壤参数,对于超剪应力模型,临界剪应力(τc)和可蚀性系数(k d);对于Wilson模型,b 0和b 1。射流侵蚀测试(JET)允许就地确定这些参数。 JETs在伊利诺伊河和Fort Cobb水库集水区的两条河沿的多个地点完成。目的是使用来自这些河岸测试的JET结果来研究流域尺度上的侵蚀性参数变化,并研究河岸可蚀性的纵向趋势。该研究还确定了这种可变性对基于过程的模型使用过量剪切应力模型和Wilson模型预测的横向退缩的影响。从JET派生的参数被合并到基于一维过程的模型中,以模拟每个流域中一条河流的河岸退缩。伊利诺伊河流域和柯布堡水库流域的可蚀性参数分别变化了2到5个和1到2个数量级。与输入侵蚀性参数相比,基于过程的模型在预测的撤退中观察到的变化较小。未校准的可蚀性参数和简化的施加的切应力估算值无法与观察到的横向退缩相匹配,这表明需要进行模型校准和/或高级流动建模。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号