...
首页> 外文期刊>The open biotechnology journal >Microcalorimetric Investigation of the Effect of the Ionic Liquid 1-Butyl-3-Methylimidazolium Chloride on the Fermentation of Saccharomyces cerevisiae AY93161 for Lignocellulosic Ethanol Production
【24h】

Microcalorimetric Investigation of the Effect of the Ionic Liquid 1-Butyl-3-Methylimidazolium Chloride on the Fermentation of Saccharomyces cerevisiae AY93161 for Lignocellulosic Ethanol Production

机译:微量量热法研究离子液体1-丁基-3-甲基咪唑鎓盐对酿酒酵母AY93161发酵生产木质纤维素乙醇的影响

获取原文

摘要

The effects of ionic liquid 1-butyl-3-methylimidazolium chloride (BMIMCl) on the ethanol fermentation process of Saccharomyces cerevisiae AY93161 were investigated by using microcalorimetry. On the basis of microcalorimetric and process data, the thermokinetic parameters of the ethanol fermentation process at different BMIMCl concentrations from 0.001 to 5 gL-1 were calculated. Compared to the control, the BMIMCl caused a decreased value of the maximum specific growth rate μm (from 0.226 to 0.105 h-1), and an increased value of the maximum specific produced heat rate pm (from 2.08 to 7.06 mWlg-1) and the total heat output H for producing 1 g ethanol (from 990 to 1871 Jg-1). The decreased μm and increased pm and H led to lower final yeast concentration (from 3.85 to 2.39 gL-1) and ethanol concentration (from 40.3 to 25.1 gL-1). This gives useful information for improving the lignocellulosic ethanol production process using the ionic liquid technology.
机译:用微量量热法研究了离子液体1-丁基-3-甲基咪唑鎓盐(BMIMCl)对酿酒酵母AY93161乙醇发酵过程的影响。根据微量量热法和过程数据,计算了在不同的BMIMCl浓度为0.001至5 gL-1的条件下乙醇发酵过程的热动力学参数。与对照相比,BMIMCl导致最大比生长速率μm的值降低(从0.226至0.105 h-1),并且导致最大比产生热速率pm的值升高(从2.08至7.06 mWlg-1),并且产生1克乙醇(990到1871 Jg-1)的总热量输出H。减小的μm以及增加的pm和H导致较低的最终酵母浓度(从3.85到2.39 gL-1)和乙醇浓度(从40.3到25.1 gL-1)。这为使用离子液体技术改善木质纤维素乙醇生产工艺提供了有用的信息。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号