The accuracy of manually recorded time study data for harvester operation shown via simulator screen.

摘要

The aim of the study was to investigate the effect of work experience on the accuracy and variation of observers recording the operation time of a harvester. A simulated thinning operation using a harvester, shown as video via a television screen in laboratory conditions, was observed by 20 inexperienced students and 10 experienced work study researchers. All the observers timed the different work elements of the harvester work with special fieldwork timers. The duration of different work elements measured by the human observers were compared to the corresponding recordings by the harvester’s automated data collector. Although the inexperienced students made more measurement mistakes than the experienced researchers, the differences in measurement error averages were not statistically significant between the groups. However, the variances of tree specific errors were significantly higher in the measurements done by the students. As inexperienced recorders, the students were not able to properly record short work elements, which lasted a maximum of 4 seconds. Due to systematic measurement errors, there was a large variation in the timing structures of the work elements among all observers. Observers’ skills and experience seems to affect measurement accuracy and thus the derived results, especially in intensive time studies. Therefore, the recorder should receive detailed training and practical experience in timing of different work elements of forest operations. In the future, with the use of automated data collectors time studies with large, detailed and accurate data will be implemented. However, due to the varying timing conditions in the forest, manual data collection is still required because of its greater flexibility.