...
首页> 外文期刊>Remote Sensing >Characterizing Urban Fabric Properties and Their Thermal Effect Using QuickBird Image and Landsat 8 Thermal Infrared (TIR) Data: The Case of Downtown Shanghai, China
【24h】

Characterizing Urban Fabric Properties and Their Thermal Effect Using QuickBird Image and Landsat 8 Thermal Infrared (TIR) Data: The Case of Downtown Shanghai, China

机译:使用QuickBird图像和Landsat 8热红外(TIR)数据表征城市织物特性及其热效应:以中国上海市区为例

获取原文

摘要

The combined usage of high-resolution satellite images and thermal infrared (TIR) data helps understanding the thermal effect of urban fabric properties and the mechanism of urban heat island (UHI) formation. In this study, three typical urban functional zones (UFZs) of downtown Shanghai were chosen for quantifying the relationship between fine-scale urban fabric properties and their thermal effect. Nine land surfaces and 146 aggregated land parcels extracted from a QuickBird image (dated 14 April 2014) were used to characterize urban fabric properties. The thermal effect was deduced from land surface temperature (LST), intra-UHI intensity, blackbody flux density (BBFD) and blackbody flux (BBF). The net BBF was retrieved from the Landsat 8 TIR band 10 dated 13 August 2013, and 28 May 2014. The products were resampled to fine resolution using a geospatial sharpening approach and further validated. The results show that: (1) On the UFZ level, there is a significant thermal differential among land surfaces. Water, well-vegetated land, high-rises with light color and high-rises with glass curtain walls exhibited relatively low LST, UHI intensity and BBFD. In contrast, mobile homes with light steel roofs, low buildings with bituminous roofs, asphalt roads and composite material pavements showed inverse trends for LST, UHI intensity, and BBFD; (2) It was found that parcel-based per ha net BBF, which offsets the “size-effect” among parcels, is more reasonable and comparable when quantifying excess surface flux emitted by the parcels; (3) When examining the relationship between parcel-level land surfaces and per ha BBF, a partial least squares (PLS) regression model showed that buildings and asphalt roads are major contributors to parcel-based per ha BBF, followed by other impervious surfaces. In contrast, vegetated land and water contribute with a much lower per ha net BBF to parcel warming.
机译:高分辨率卫星图像和热红外(TIR)数据的组合使用有助于了解城市织物特性的热效应以及城市热岛(UHI)形成的机理。在这项研究中,选择了上海市中心的三个典型城市功能区(UFZs)来量化精细尺度的城市织物特性与其热效应之间的关系。从QuickBird图像(日期为2014年4月14日)中提取的九个地表表面和146个聚集的地块用于表征城市织物的特性。从陆地表面温度(LST),UHI内部强度,黑体通量密度(BBFD)和黑体通量(BBF)推导出热效应。从2013年8月13日和2014年5月28日的Landsat 8 TIR波段10中检索到了净BBF。使用地理空间锐化方法对产品进行重新采样,以达到高分辨率,并进行了进一步验证。结果表明:(1)在UFZ层面,陆地表面之间存在明显的热差异。水,植被茂密的土地,浅色高层建筑和玻璃幕墙高层建筑的LST,UHI强度和BBFD相对较低。相比之下,轻钢屋顶的移动房屋,沥青屋顶的低层建筑,柏油路和复合材料人行道的LST,UHI强度和BBFD呈相反趋势。 (2)研究发现,在量化包裹发出的多余表面通量时,以包裹为基础的每公顷净BBF可以抵消包裹之间的“尺寸效应”,这是更合理和可比的; (3)在检查地块级地面与每公顷BBF之间的关系时,偏最小二乘(PLS)回归模型显示,建筑物和柏油路是每公顷基于BBF的地块的主要贡献者,其次是其他不透水的地面。相比之下,植被的土地和水以每公顷的净BBF降低了包裹增温的速度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号