首页> 外文期刊>Latin American Journal of Solids and Structures >Adaptive Fuzzy Sliding-Mode Control of Wheel Slide Protection Device for ER24PC Locomotive
【24h】

Adaptive Fuzzy Sliding-Mode Control of Wheel Slide Protection Device for ER24PC Locomotive

机译:ER24PC型机车轮滑保护装置的自适应模糊滑模控制。

获取原文
           

摘要

Wheel Slide Protection Devices (WSPD) are employed in railway vehicles to maximize the average of the possible frictional braking force, which is a nonlinear function of the slip ratio of the wheel sets. In this paper, to control the WSPD, a low-order model is presented and un-modeled dynamics are considered as uncertainties. Due to the nonlinear dynamics of the system and presence of uncertainties, Adaptive Fuzzy Sliding-Mode Control (AFSMC) is employed to regulate the slip ratio towards the desired value. The proposed controller employs a Pulse Width Modulation (PWM) technique to generate the braking torque. The second Lyapunov theorem is used to prove the closed-loop asymptotic stability. In the simulations, the switching dynamics of WSPD is considered and the multi-body dynamics method is used for modeling the longitudinal dynamics of ER24PC locomotive. The obtained results reveal that by using the AFSMC method, the slip ratios of wheel sets converge to the reference values. Unlike the conventional method, in which the fluctuations of slip ratio diverge near the stopping time, simulation studies reveal that with the AFSMC method, the stopping time of the locomotive and the fluctuation amplitude of the slip ratios are reduced.
机译:轮滑保护装置(WSPD)用于铁路车辆中,以使可能的摩擦制动力的平均值最大化,这是轮对滑移率的非线性函数。在本文中,为控制WSPD,提出了一个低阶模型,未建模的动力学被认为是不确定性。由于系统的非线性动力学和不确定性的存在,采用自适应模糊滑模控制(AFSMC)将滑移率调节到所需值。所提出的控制器采用脉冲宽度调制(PWM)技术来产生制动扭矩。第二个Lyapunov定理用于证明闭环渐近稳定性。在仿真中,考虑了WSPD的切换动力学,并使用多体动力学方法对ER24PC机车的纵向动力学进行建模。获得的结果表明,通过使用AFSMC方法,轮对的滑移率收敛到参考值。仿真研究表明,与传统方法不同,滑移率的波动在停止时间附近发散,而AFSMC方法可以减小机车的停止时间和滑移率的波动幅度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号