...
首页> 外文期刊>Materials Theory >An analysis of two classes of phase field models for void growth and coarsening in irradiated crystalline solids
【24h】

An analysis of two classes of phase field models for void growth and coarsening in irradiated crystalline solids

机译:两种类型的相场模型的分析,这些相场模型用于照射的结晶固体中的空隙生长和粗化

获取原文

摘要

A formal asymptotic analysis of two classes of phase field models for void growth and coarsening in irradiated solids has been performed to assess their sharp-interface kinetics. It was found that the sharp interface limit of type B models, which include only point defect concentrations as order parameters governed by Cahn-Hilliard equations, captures diffusion-controlled kinetics. It was also found that a type B model reduces to a generalized one-sided classical Stefan problem in the case of a high driving thermodynamic force associated with the void growth stage, while it reduces to a generalized one-sided Mullins-Sekerka problem when the driving force is low in the case of void coarsening. The latter case corresponds to the famous rate theory description of void growth. Type C models, which include point defect concentrations and a non-conserved order parameter to distinguish between the void and solid phases and employ coupled Cahn-Hilliard and Allen-Cahn equations, are shown to represent mixed diffusion and interfacial kinetics. In particular, the Allen-Cahn equation of model C reduces to an interfacial constitutive law representing the attachment and emission kinetics of point defects at the void surface. In the limit of a high driving force associated with the void growth stage, a type C model reduces to a generalized one-sided Stefan problem with kinetic drag. In the limit of low driving forces characterizing the void coarsening stage, however, the model reduces to a generalized one-sided Mullins-Sekerka problem with kinetic drag. The analysis presented here paves the way for constructing quantitative phase field models for the irradiation-driven nucleation and growth of voids in crystalline solids by matching these models to a recently developed sharp interface theory.
机译:进行了两类相场模型的正式渐近分析,以评估受辐照固体中的空隙生长和粗化,以评估其尖锐的界面动力学。已经发现,B型模型的急剧的界面极限(仅包括点缺陷浓度作为由Cahn-Hilliard方程控制的阶次参数)捕获了扩散控制的动力学。我们还发现,在与空洞生长阶段相关的驱动热动力很高的情况下,B型模型可以简化为广义单侧经典Stefan问题,而当B型模型可以简化为广义单向Mullins-Sekerka问题时在空隙变粗的情况下,驱动力较低。后一种情况对应于著名的空洞生长速率理论描述。 C型模型显示了混合扩散和界面动力学,该模型包括点缺陷浓度和区分空隙相和固相的非保守阶数参数,并采用耦合的Cahn-Hilliard和Allen-Cahn方程。特别地,模型C的Allen-Cahn方程简化为表示本征点在空洞表面处的附着和发射动力学的界面本构定律。在与空隙生长阶段相关的高驱动力的限制下,C型模型简化为具有动力学阻力的广义单侧Stefan问题。但是,在表征空隙粗化阶段的低驱动力的极限下,该模型简化为带有动阻力的广义单面Mullins-Sekerka问题。通过将这些模型与最近开发的尖锐界面理论相匹配,此处介绍的分析为构建用于辐射驱动的成核和结晶固体中空隙生长的定量相场模型铺平了道路。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号